Discounted Products

3M™ 314D Utility Cloth For maintenance and general workshop use Durable coating and excellent mineral retention means long product life Easy to tear backing leaves clean and straight edges J-weight cloth gives enhanced flexibility without mineral loss and minimal surface cracking

Sibille introduces electrical safety mats in the personal protective equipment range, insulating mats insulates the worker from the ground to avoid him/her being crossed by electrical current in case of direct contact or pace voltage. The choice of the class must be determined according to the maximal nominal voltage of the network (IEC 61111 annex A). Simple use and maintenance rules must be respected (IEC 61111 annex B). The marking colour is made according to the colour coding of the IEC 61111. Dimensions are (600x1000)mm [LxB] & weighs 1.84Kg Maximum operating voltage(AC) for class 0 is 1000 V AC Thickness of insulating mat is 1.5mm Elastomer with a new, more scratch-resistant formulation Slightly rough surface with grey colour

CONN TERM BLK DISCONN 12-26AWG

IP68 Metric Dome Top Gland Nylon cable gland supplied complete with locknut and entry thread seal. Features and Benefits • Manufactured from UL approved Nylon 66 • Flammability rating to UL 94V-2 • Provides watertight seal to IP68 • Offers strain relief and protection for cables

Stainless Steel Cable Ties These stainless steel cable ties are an ideal alternative where nylon cable ties are not suitable. 316 Stainless steel has excellent resistance to abrasion, corrosion, radiation, weathering and extremes of temperature. They have a greater load carrying capacity and may be used for general strapping applications. Features and Benefits • Available in uncoated and polyester coated stainless steel • Flame retardant • High tensile strength • Self-locking design • Excellent resistance to high temperature, chemicals, weather and abrasion Applications Suitable for applications in industries such as oil and gas, marine, chemical and maintenance. Approvals ABS, DNV, Lloyd's, UL Standards IEC 62275 (2006), UL-1565

Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque is reached. For right-hand and left-hand use and with 9x12mm insert square for the insertion of insert tools. For 9x12 mm interchangeable insert tools Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values Audible and tactile release mechanism when the set torque value is reached Measuring range: 20-100 Nm: Precise to +/- 3% Very robust design with ergonomic 2-component handle suitable for right-hand use

POT 10K OHM 1/20W CARBON LINEAR

HF18FH Series Sockets HongFa professional range of din rail mount relay sockets for the HF18 series power relays.

320 WATTS VARIABLE 33 OHMS 10%

Sensor Head Fitted with a conical, UV stable, impact resistant, translucent cover Omni-directional NEMA connection Replacement for sensors using NEMA Rotaloc Socket Daylight Lighting Controllers These controllers automatically turn lights 'ON' and 'OFF' in response to changes in ambient light levels, primarily the transition from day to night and vice-versa. The more advanced types (see note below) have inbuilt logic to minimise false triggering, whereas the remainder have inbuilt time delays or higher 'OFF' thresholds, to prevent on/off cycling. As a general rule, these controllers should be sited such that they are not illuminated, by the light they are controlling. Nominal supply voltage is 230Vac.,Note regarding energy-saving negative-hysteresis controllers,Where figures for the 'OFF' threshold are lower than for the 'ON' threshold, the sensor is designed such that four thresholds are actually monitored. These are: dusk, the middle of the night, dawn and the middle of the day. Monitoring at times other than dusk and dawn enables the sensor to determine what it should be looking for next, minimising false triggering and improving overall controller operation.

DC-DC ISOLATED, 50 W, 18~36 VDC

The SKF shims are made up of high quality stainless steel. It is easy to fit and remove. Fully de-burred Close tolerances for accurate alignment

TR 635 top2 - Digital Time Switch The TR 635 top2 is a digital time switch for front panel and wall installation 1 channel digital time switch weekly program Text-based operator guidance in the display 84 memory locations Interface for OBELISK top2 memory card (PC programming) 10 year power reserve (lithium battery) Pulse and cycle program Switching preselection Permanent ON/OFF switching Count-down timer Integrated hour counter Holiday program 2 random programs Back lighting (can be turned off) PIN coding Automatic summer/winter time changeover Digital

DLX Series Chassis Connectors All metal housing gives greater overall RF protection and shielding Duplex ground contact improves contact integrity between chassis and cable connector Warning Not to be used as mains connectors

CONN PLUG 4POS PANEL MOUNT

CAP CER 0.047UF 16V Y5V 0402

CONN HOUSING 2POS .100 HI PRESS

Crimp Housings, 70066 A, C, G, H and N Series Version A (Non-polarized) Mates with 70246, 70543, 70553 and 74099 Series headers typical stock numbers: 670-1771 , 670-0810 , 670-0844 and 808-4270 respectively. Use with 70058 Series terminals typical stock number 670-6293 Version C (Polarized, front ribbed) Mates with 70543 and 70553 Series headers typical stock numbers: 670-0810 and 670-0844 respectively Use with 70058 Series terminals typical stock number 670-6293 Version G (Polarized: positive latch) Mates with 70543 and 70553 Series headers typical stock numbers: 670-0810 and 670-0844 respectively and with 70107A and B Series housings typical stock numbers 679-5965 and 670-4098 respectively Use with 70058 Series terminals typical stock number 670-6293 Version H (Polarized, friction lock) Mates with 6373 and 7478 Series headers typical stock numbers 679-5583 and 679-5448 respectively Use with 70058 Series terminals typical stock number 670-6293 Version N (TPA™ (connector position assurance) ensures that terminals are fully seated and guarantees that the terminals will not back out) Mates with 70543 and 70553 Series headers typical stock numbers 670-0810 and 670-0844 respectively and with 70107A and B Series housings typical stock numbers 679-5965 and 670-4098 respectively Use with 70058 Series terminals typical stock number 670-6293 Note For Version D see stock number 670-3890 2.54mm Molex C-Grid/SL Series

Klaxon Sonos LED Base Sounder Beacon The Klaxon Sonos LED Base can accommodate various detector heads from major manufacturers. It reduces wiring and installation costs and provides both detection and alarm at the same point. With the addition of a cover plate, it can be used as a standalone sounder beacon. The Sonos LED base has twelve high powered LEDs and a 95 dB sounder and complies with the Disability and Discrimination Act (DDA). The beacon can be seen from every angle including directly below the unit. Features and Benefits Combined sounder beacon current consumption of less than 10 mA Unique beacon design for optimal light coverage Two large cable entries for quick and simple installation Designed to complement various detectors 32 distinct alarm tones Cover plate available for use as a sounder beacon only Applications The Sonos LED Base Sounder Beacon is an ideal solution for any type of fire alarm application. Standards EN54-3 Type A.

Dedicated crimp tool The JST Crimping Tools are parallel action, ratchet style hand tools designed to crimp the applicable contact in strip form, while maintaining the reliability and performance of semi-automating tooling. Features & Benefits • Ratchet mechanism for crimp conformation • Precision ground dies • Safe operation • 2 crimping sections Standards UL, CSA, TUV Dedicated crimp tooling (JST)

AC-DC ADAPTER, INTERCHANGEABLE,U

DIN 41622 Double Row Connectors 8,12,16,20 and 30 ways available Male and Female variants

Compact Busbar/ Base Mounting Current Transformers - Series 13 A range of compact moulded case current transformers suitable for primary currents from 40A to 300A with built in sealable terminal covers. For transforming various primary currents into 5A standard secondary using up to 20mm diameter cables. DIN rail mounting clip supplied Built in sealable terminal covers Mounting feet supplied Narrow width: 45mm Dimensions: H65 x W45 x D30mm 21mm aperture Conforms to IEC185, BS 7626, BSEN 60044-1and IEC 60044-1 Rated system voltage: 0.72/3kV Ambient temperature range: -30 to 85°C Continuous current: 1.2 x rated current CT Class Information for Series 16 331-395 - Class 1 331-547 - Class 1 331-373 - Class 0.5 331-367 - Class 0.5 331-446 - Class 0.5 Current Transformers