Discounted Products

EC PCB Fan Speed Controllers Unboxed manual speed controllers for use with EBM-Papst EC (electronically commutated) fans. These are all purely the control assembly and PCB and are not mounted in an enclosure. CN1003 (743-4807) variable speed controller The CN1003 ( 743-4807 ) unboxed controller is designed for use with the full range of ebm-papst ECi (Electronically Commutated with integrated electronics) fans. It is powered via the DC output from by the fan and provides a 0-10V signal to enable infinitely variable speed control. The controller also enables speed measurement of the fan using a multimeter with a frequency measuring facility (where a tacho output is provided from the fan). Specification: Input voltage 10 VDC (supplied from fan); Maximum ambient temperature 50°C; Mounting hole diameter 10mm; Output voltage range 0-10 VDC. CN1064 (743-4810) 5 position speed controller The CN1064 ( 743-4810 ) unboxed 5 speed controller is designed for use with the full range of ebm-papst EC fans. Powered by the 10VDC output from the motor, it provides variable speed control with 5 speed settings. Each setting can be adjusted during commissioning between 0 % to 100% speed. This controller can control multiple fans running at the same speed. No separate power supply required. CN1063 (743-4817) adjustable max / min variable speed controller The CN1063 ( 743-4817 ) unboxed controller is designed for use with the full range of ebm-papst EC fans. Powered by the 10V DC output from the motor, it provides infinitely variable, manual speed control between 0% and 100%. However, the CN1063 ( 743-4817 ) differs from the CN1003 ( 743-4807 ) in that it has adjustable limits. The maximum and minimum speeds can be varied during commissioning to limit the maximum speed and/or restrict the lower speed. No separate power supply is required.

Plastic Filter Units A 4mm filter gives 60% retention of dust particles (replacement filters 80 x 80mm 494-7975 & 120 x 120mm 494-7981 The finger guard is attached to the fan with screws (not supplied). The mesh screen and filter are then retained by the outer cover which clips over the finger guard Note Filter units ( 696-3534 , 696-3531 , 221-336 & 221-342 ) include filter pads. Filter pad replacements ( 494-7975 and 494-7981 ) are also available separately for filter units 221-336 & 221-342 .

CWC Series Professional range of WEG contactors from the CWC Series designed for switching of electric motors. The contactors are modular and compact but at the same time robust and highly reliable. Built and tested according to IEC/EN60947 and DIN VDE 0660. Direct mounting capabilities. The controllers include contactors and reversing contactors. AC/DC Operated Screw Terminals DIN Rail or Panel Mount Compact space saving design Built in auxiliary contacts WEG Contactors

FIBOX Euronord Aluminium Enclosure Euronord range of enclosures from Fibox are designed to house DIN Rail-mounted terminal blocks and various types of sensors. The enclosure lid has a sealing gasket, and can be easily sealed with a single 90° turn on the quick-lock stainless steel screw. Features and Benefits • Temperature range -50°C to +80°C (continuous), -50 to +140°C (short term) • Designed to house DIN Rail-mounted terminal blocks and various types of sensors • IP 66/67 • Base colour RAL 7001 (IP) Ingress Protection and what it means? IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. FAQ’s Can the box be used outside? • Yes, Euronord series enclosures have IP66, IP67 & IP68 rating Can you purchase mounting plates separately • No, Euronord mounting plates are not available separately What is supplied? • Enclosure, Base with screws for mounting plate/ DIN Rail, cover with PUR or Neoprene gasket and stainless steel cover screws Standards EN 62208:2003 (50298:1998). EN 60950. Approvals UL Type 1, 4, 4X, 12, 13 (USA); IP 67/IP 66 (EURO); IEC 529 (Others)

Panel Receptacles Amphenol 62GB miniature bayonet lock square flange receptable connectors are incredibly durable and versatile, manufactured from solid aluminium bar, with a zinc cobalt olive drab finish and complete with solder bucket gold plated male or female contacts and with inserts of polychloroprene rubber. The Amphenol 62GB range of mil spec connectors are similar in design and function to MIl-DTL-26482 but with an added keyway that assists in preventing the mis-mating of the connectors.These durable square flange receptacle connectors are resistant to harsh environments and extreme temperatures, 62gb receptacle connectors are ideal for use in many military and industrial connector applications. Dimensions Ways A (dia.) (mm) B (mm) C(dia.) (mm) W (flange width) (mm) 6 17.4 18.26 3.05 24.4 7 17.4 18.26 3.05 24.4 8 21.95 20.62 3.05 26.7 10 21.95 20.62 3.05 26.7 12 25.12 23.01 3.05 29.3 19 25.12 23.01 3.05 29.3 26 28.27 24.61 3.05 31.5 32 31.45 26.97 3.05 33.8 Note Size 16 contacts, except for stock no. 442-2038 which has 8 size 16 and 4 size 20 contacts. Standards RS MIL-C-26482; BS 9522 F0017 Shell Material Aluminium alloy Contact Material Copper alloy (brass) Insulator Material Polychloroprene Sealing Grommet Material Polychloroprene Current Rating 5A per contact (fully loaded connector) 7.5A (per contact, in isolation) Working Voltage 700Vdc or ac peak Voltage Proof 2100Vdc or ac peak Contact Resistance 5mΩ max. Insulation Resistance 5000 MΩ Temperature Range -55 → +125°C Environmental Classification 55/125/56 Wire Size, size 16 contacts 16-20 AWG Wire Size, size 20 contacts 20-24 AWG

SWITCH ROTARY 12POS 200MA 115V

RS LED Floodlight IP65 Rated High quality outdoor LED floodlights at competitive price. LED flood lights use up to 70% less power compared to traditional lamps. The RS LED floodlights also have an average life which is up to 5 times longer compared to traditional floodlights. These luminaires are also eco-friendly with virtually no UV, IR, lead, mercury or air pollution. Good heat dissipation performance. IP65 rating. Service life over 50000 hours. Durable and completely corrosion resistance aluminium casing Toughened glass Energy-saving up to 70% compared to traditional floodlights

CAP PUSHBUTTON ROUND RED

Mueller SMD Breakout Cable Comprehensive range of positive & negative test leads which provide the user with a variety of SMD breakout & testing options. Comprising of 76mm or 200mm lead options and either PP or nylon insulators dependant on the application environment. Comes supplied with a double banana plug to insulated alligator clips SMD Breakout Cable Assemblies

EVO9 Series Cable Tie Tensioning Tools The EVO9 cable tie tensioning tool from HellermannTyton is ergonomically designed to reduce the risk of repetitive stress injuries to operators while concurrently increasing productivity. It tensions, locks and cuts the cable tie. The EV09 is available in a standard grip span (stock no.126-8893), short grip span (stock no.126-8894) and high tension (stock no.126-8895).Features and Benefits Ergonomic, slip-proof handle for a comfortable and secure gripLow maintenanceFast and precise application with minimum effort (TLC mechanism)Convenient and simple tension adjustmentIntegrated 3 position quick adjustment overrideHousing made of resilient and lightweight glass fibre reinforced polyesterStandard grip span (95 mm) and short grip span (90 mm) availableApplications The EVO9 cable tie tensioning tool can be used in the Aerospace, Automotive, Chemical, Defence, Electronics, Food, Offshore, Rail, Shipbuilding, Solar, Wind and Telecommunications industries.Approvals RoHS.

SENSOR REED SW SPST-NO W LEADS

CABLE ROLLER FOR CABLES UP TO 1"

Ehmann LED Flush Mounted Dimmer This Bodo Ehmann electronic LED dimmer switch is silent, as it operates without a choke. There is no standby consumption thanks to a real on/off switch saving energy. The minimum and maximum brightness can be adjusted in wide ranges, resulting in flickering free lighting of the luminaire at these levels, Features and Benefits Suitable for dimmable led lamps, LED driver for incandescent and HV-halogen lamps Wide range from minimum to maximum brightness No standby consumption, with on/off switch Silent operation Note These dimmers have been fully tested for use with led lamps. For a full compatibility list of LED Lamps, use the QR Code. Switches

Cree XLamp MX-6 Series LEDs The XLamp MX-6 family of LEDs, from Cree, provide the lighting-class performance and reliability of Cree’s XLamp LEDs in a flat-top PLCC package. The XLamp MX-6 family of LEDs are innovative LEDs ideal for a wide range of lighting applications including: linear lighting, LED light bulbs, under cabinet lighting, fluorescent replacement and retail display lighting. White high lumen output LEDs Maximum drive current: MX-6 = 1000mA, MX-6S = 175mA Maximum forward voltage: MX-6 = 3.8V, MX-6S = 22V Wide viewing angle: 120° uniform light output without secondary optics ANSI-compatible chromaticity bins Electrically neutral thermal path Unlimited floor life at ≤ 30°C/85% RH Cree - White LEDs

MS-LFR Series Filter Regulators A combined pressure regulator and filter from Festo. The MS4 and MS6 pneumatic filter regulators remove contaminates from compressed air down to a particle size of 5 μm or 40 μm (dependent on filter cartridge). Available in pressure ranges 0.3 bar to 7 bar and 0.5 bar to 12 bar, the MS series filter regulators have a high flow rate and integrated return flow for exhausting air from port 2 to port 1. Available with G1/8 or G1/4 ports. Features and Benefits Constant output pressure with return flow Choice of fully auomatic or manual drain Plastic or fully intergrated metal bowel guard Can be fitted with analogue pressure gauge or sensoro with LCD display Rotary knob with detent can be locked to prevent setting changes Regulators and Filter Regulators

Optional Padlockable Handles For use where a MAIN SWITCH is specified Features silver faceplate and black Handle 4 hole fixing IP65 ingress protection Padlockable (x4) in "OFF" position Separate versions for enclosed polycarbonate cam switches, or open (panel) extended cam switches Kraus & Naimer All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply.

Earth Terminals Earth terminal blocks that provide reliable electrical and mechanical contact with the DIN Rail. Features and Benefits • Green/yellow colour coded • Flexibility to snap onto symmetrical and asymmetrical rails • Screw clamp connection Approvals UL Listed; CSA Certified; ASE; SETI; SEMKO; NEMKO; DEMKO; GOST; KEMA; E ExiI/II; E Exei/II

Face Mount - 10mm Shaft SICK STEGMANN High-resolution Incremental Encoders The DFS60 programmable incremental encoders can be programmed to produce any ppr from 1 to 10000. In addition , the output signals are software selectable: TTL/RS422 or HTL/Push-pull, making the DFS60 a truly universal incremental encoder. The programming tool consists of a USB lead and Windows XP/Vista/7 compatible software, designed for ease of use, enabling on site programming in seconds. Any PPR can be programmed from 1 - 10000 Programmable output levels TTL (RS422) or HTL (Push-pull) Solid shaft or hollow shaft design Electronic adjustment of zero pulse width and position Sealed to IP65 Highly robust due to metal code disc Wide temperature range -30 → +100 °C A flexible, reliable encoder for multi-purpose use

Metal Shell Unterminated Solder cups will accommodate 26 AWG cable and smaller Splayed solder cup rows to aid user assembly Dimensions for Metal Shell Terminated and Unterminated Type A B C D E F G H J 9-way plug 19.94 7.82 14.35 10.16 6.86 8.48 4.7 10.57 4.65 9-way socket 19.94 7.82 14.35 10.16 6.86 10.16 6.38 10.90 4.98 15-way plug 23.75 7.82 18.16 13.97 6.86 12.29 4.7 10.57 4.65 15-way socket 23.75 7.82 18.16 13.97 6.86 13.97 6.38 10.90 4.98 21-way plug 27.56 7.82 21.97 17.78 6.86 16.10 4.7 10.57 4.65 21-way socket 27.56 7.82 21.97 17.78 6.86 17.78 6.38 10.90 4.98 25-way plug 30.10 7.83 24.51 20.32 6.86 18.64 6.38 10.57 4.65 25-way socket 30.10 7.83 24.51 20.32 6.86 20.32 6.38 10.90 4.98 31-way plug 33.90 7.82 28.31 24.13 6.86 22.45 4.7 10.57 4.65 31-way socket 33.90 7.82 28.31 24.13 6.86 24.13 6.38 10.90 4.98 37-way plug 37.72 7.82 32.13 27.94 6.86 26.26 4.7 10.57 4.65 37-way socket 37.72 7.82 32.13 27.94 6.86 27.94 6.38 10.90 4.98 51-way plug 36.45 8.92 30.86 49.76 8.1 24.99 5.79 10.57 4.65 51-way socket 36.45 8.92 30.86 49.76 8.1 26.67 7.47 10.90 4.98 100-way plug 55.1 10.00 45.72 36.62 9.14 35.15 6.88 10.56 4.65 100-way socket 55.1 10.00 45.72 36.62 9.14 38.30 10.01 10.89 4.98 Standards Mil-PRF-83513, BS9523-F0002 Micro D 0.05inch Pitch Designed for use in electronic systems in commercial and military aerospace, military land and sea and industrial/telecommunication applications, the Micro D connector provides exceptional mechanical and electrical integrity, whilst operating in extreme vibration and environmental conditions. High Performance, Gold Plated Twist Pin Contact System 3 Amp Contact Rating High Density ....

VR68 Series, Axial VR68 Series are high Ohmic/High Voltage Metal Glaze Leaded Resistors A metal glazed film deposited on a high grade ceramic High pulse loading capability (10 kV) Small size (0718) Pure tin plating provides compatibility with Lead -free and Lead containing soldering processes Applications: Where high resistance, high stability and high reliability at high voltage are required; Safety component in combination with high voltage; Picture tubes; High voltage bleeders; Cascade switches Rated dissipation at 70°C 1W Resistance tolerance 5% Temperature coefficient 200ppm/°C Limiting element voltage 10000Vdc / 7000Vrms Insulation resistance 10 4 MΩ Operating temperaturenge -55 → 70°C Body length 19mm Body diameter 6.8mm Lead diameter 0.78mm

Piezo pushbutton switches IP 68 Ø 16mm series PBA APEM Piezo switches are sealed to IP68 standards, are easy to clean and feature a very long mechanical life due to a solid state output – making them an ideal choice for demanding applications where reliability is important. The one-piece construction of APEM Piezo switches allows for a completely closed flat actuation surface, ensuring the prevention of liquids or other contaminants whilst making the surface easy to clean. Ideal APEM Piezo switch applications would include use in the food processing industry, medical applications and the mining industry. Sealed to IP68 Easy to clean metal surface Long life (50 million cycles)

Cutters-Sensoplus® Anit-slip bow enhances pinpoint control Spot-welded double leaf spring ensures consistent repeatability Precision box joint - means a smoother action for the exact guidance of jaws without the need for readjustment. operational life Ergonomic-dual composite handles for improved user comfort Induction-hardened edges ESD safe

MISTRAL65 Consumer Units The new range of MISTRAL65 consumer units allow almost any type of electrical distribution system to be implemented in industrial, commercial and residential environments. The consumer units are manufactured in a halogen-free thermoplastic which is completely recyclable. The range includes solutions with transparent or opaque doors which open up to 180°, and a choice of between 4 and 72 modules, meeting the most recent regulatory requirements and ensuring an enormous variety of application types are covered. The refined design is marked by some particular characteristics, for example the perfect symmetry, which allows either the whole consumer unit or just the front panel to be rotated, easily changing the door opening side. In the multi-row versions, the centre distance of the DIN rails can be varied from 150 mm to 125 mm, further increasing the versatility of the product and using the same standard accessories. The frame is extractable for quick and easy bench cabling. The ample internal space makes the cables more accessible, facilitating cabling and giving the possibility to anchor the cable ties to special eyeholes on the frame. The consumer units are designed to house optional dedicated terminal blocks in two different colour schemes to allow quick and tidy cabling, and making separate power supplies easily recognisable, when used. The range is completely coordinated with ABB MCBs and MCCBs, all of which can be easily installed simply by moving the rail provided for their housing. The project design also aimed to optimise cabling, assembly and installation times of the consumer units. Everything has been designed to make the installer's job quicker and easier, allowing them to implement functional and tidy switchboards. The 180° door opening facilitates total accessibility to the interior of the consumer unit Petrol blue transparent door The symmetry of the front allows the opening to be completely reversed The door has an ergo...

PCB Switch Kit A rotary switch mechanism with adjustable stop which will take up to a maximum of five extra wafers from the variety available A spacer kit is available to maintain a 6.35mm pitch between individual wafers Terminal spacing is on a 2.54mm pitch. The switch is supplied fitted with a non-interchangeable drive wafer Shaft diameter 6mm All wafers are break before make Note The 'spacers' contain a selection of items - qty 10 spacers, qty 2 front insulators, qty 1 rear driver shafts, qty 1 retaining strap, qty 2 tie rods, and qty 2 push-on fixings.

TLS-GD2 Solenoid Interlock Switch, for Demanding Applications Features & Benefits Note The TLS-GD2 is a positive mode, tongue operated guard locking interlock switch that locks a machine guard closed until power is isolated and ensures that it remains isolated while the guard is open. The switch has three safety (N.C.) contacts and two auxiliary (N.O.) contacts. The head of this interlock switch has two entry slots and it can be rotated to provide four actuator entry points. A blanking plug is provided to seat the unused slot. The guard may only be opened when a signal is applied to the TLS-GD2 internal solenoid which releases the lock mechanism. Therefore this solenoid interlock switch is ideal for machines which do not stop immediately or where premature interruption of the machine could cause damage to tooling and components or cause an additional hazard. The safety switch is available in three types. The TLS-1 GD2 and TLS-3 GD2 incorporate a power-to-release function. Two manual release points with security screws allow the locked TLS-GD2 to be released in emergencies. An optional lid-mounted key-release style can also be supplied. The TLS-2 GD2 has a power-to-lock function. Each type of switch has five sets of contacts of various forms and are suitable for use with PLCs. The TLS-1 GD2 and TLS-3 GD2 are both available with escape release options. They are intended for machine guarding with full body access. The switch is installed so that the escape release push button on the rear side is accessible from inside the hazardous area. This allows the intentional unlocking of the TLS-GD2 from inside a hazardous area, providing a means of escape for a person who may become trapped. A stainless-steel actuator guide is fitted to protect the switch from actuator damage due to poor guard alignment or guard wear. TLS-GD2 has an ingress protection rating ...