Devlin

Devlin Slide Switches PCB mounting Vertical or right angle style Contacts: Silver plated brass 10000 operations

Secondary SMPSU, AC/DC Input, 2.7A Output Accepts AC or DC inputs with DC output selectable to 5, 12, or 15Vdc Supplied with the output set to 12Vdc, adjustable by on-board potentiometer from 10.2 to 13.3Vdc Substitute two resistors and the output can be re-scaled to 5Vdc fixed or 14 to 17.2Vdc adjustable Switched mode efficiency without high voltages or HF switching noise Regulated low noise output Power on & output supply LEDs Includes crowbar output protection for 12Vdc working as standard Built-in overload & short circuit protection Dimensions 107x69x40mm, fixing centres 55.88 x 94mm, hole Ø 4mm Technical Specification Line regulation Min.-max. 20 mV Load regulation 0 to 100% 60 mV Short circuit current 3 A Ripple 50 mV max. Switching frequency 58 kHz Dimensions L. 107 W. 69 H. 40 Wt. 100g Fixing hole centres 56 ´ 94 Ø 4.0mm +12V Nominal +15V Nominal +5V Nominal AC inputs 17 - 25Vac 18 - 25Vac 11 - 25Vac DC inputs 16 - 35Vdc 19 - 35Vdc 10 - 35Vdc Outputs 10.2 - 13.3Vdc adjustable 14 - 17.2Vdc adjustable 5Vdc fixed R3 5.6kΩ 10kΩ 5.6kΩ R5 5.6kΩ 5.6kΩ

Microprocessor Output Modules dc and ac For use where isolated output drive is required e.g. motors, lamps, heaters, solenoids, etc. Modules provide the complete output interface function incorporating optical isolation with power drive components. ac modules use zero voltage switching for low noise operation, a dc type is also available. Approvals 7777

Devlin Slide Switches Devlin Slide switches are reliable and robust switches which can be used in a variety of switching applications. These panel mount slide switches offer high quality silver contacts which add the benefit of long term performance. Panel mounting slide switches Round aluminium actuators

Devlin D & E Series - Battery Backed PSUs 12V and 24V wall mounting power supplies with low noise and low ripple DC output designed to provide a continuous DC supply and support the load during power failure. Suitable for use in fire, security and other similar applications. Rugged steel enclosure in dove grey with integral battery compartment LED power-on indicator Battery low signal (to drive external LED) Reverse polarity protection Provision for anti- tamper switch (V23 microswitch) Cover fitted with M4 tamperproof security screws Cable/Conduit entry via 2 x 20mm knock-outs on top and base Selection Guide D & E Series - Battery Backed PSUs Manu. Part No. Available Battery Space (LxHxD) Suitable Yuasa NP Series Batteries Manu. Part No. Stk Nos. For Batteries Stk no. 537-5208 PSU-D437-010 180 x 105 x 70 mm 1 x 12V 3.2Ah, 4.0Ah, 7.0Ah NP3.2-12, NP4-12, NP7-12 198-8052 , 198-8068 , 597-835 Stk no. 537-5214 PSU-D438-010 180 x 105 x 70 mm 1 x 12V 3.2Ah, 4.0Ah, 7.0Ah NP3.2-12, NP4-12, NP7-12 198-8052 , 198-8068 , 597-835 Stk no. 537-5220 PSU-D439-010 305 x 105 x 70 mm 2 x 12V 3.2Ah, 4.0Ah, 7.0Ah NP3.2-12, NP4-12, NP7-12 198-8052 , 198-8068 , 597-835 Stk no. 537-5236 PSU-E270-010 320 x 190 x 95 mm 1 x 12V 17.0Ah NP17-12 200-6505 Stk no. 537-5258 PSU-E271-010 320 x 190 x 95 mm 2 x 12V 7.0Ah NP7-12 597-835 Note Back up batteries must be ordered separately, see 'Selection Guide'.

Devlin D & E Series - Battery Backed PSUs 12V and 24V wall mounting power supplies with low noise and low ripple DC output designed to provide a continuous DC supply and support the load during power failure. Suitable for use in fire, security and other similar applications. Rugged steel enclosure in dove grey with integral battery compartment LED power-on indicator Battery low signal (to drive external LED) Reverse polarity protection Provision for anti- tamper switch (V23 microswitch) Cover fitted with M4 tamperproof security screws Cable/Conduit entry via 2 x 20mm knock-outs on top and base Selection Guide D & E Series - Battery Backed PSUs Manu. Part No. Available Battery Space (LxHxD) Suitable Yuasa NP Series Batteries Manu. Part No. Stk Nos. For Batteries Stk no. 537-5208 PSU-D437-010 180 x 105 x 70 mm 1 x 12V 3.2Ah, 4.0Ah, 7.0Ah NP3.2-12, NP4-12, NP7-12 198-8052 , 198-8068 , 597-835 Stk no. 537-5214 PSU-D438-010 180 x 105 x 70 mm 1 x 12V 3.2Ah, 4.0Ah, 7.0Ah NP3.2-12, NP4-12, NP7-12 198-8052 , 198-8068 , 597-835 Stk no. 537-5220 PSU-D439-010 305 x 105 x 70 mm 2 x 12V 3.2Ah, 4.0Ah, 7.0Ah NP3.2-12, NP4-12, NP7-12 198-8052 , 198-8068 , 597-835 Stk no. 537-5236 PSU-E270-010 320 x 190 x 95 mm 1 x 12V 17.0Ah NP17-12 200-6505 Stk no. 537-5258 PSU-E271-010 320 x 190 x 95 mm 2 x 12V 7.0Ah NP7-12 597-835 Note Back up batteries must be ordered separately, see 'Selection Guide'.