Discounted Products

Calibration/ Substitution, 8 Decade-Thumb Wheel Resistance Boxes For simulating resistance transducers and for laboratory, industrial and educational use. Required resistance is set by clearly marked thumbwheel switches, colour coded to aid identification.Model10511040Zero residual resistanceAccuracy100 to 100 k10 M decade: 1cades: 0.10 to 1 M10 decades: 0.5cades: 0.1ecades: 1 decades: 0.5%0.1 decades: 5ecade: 1%0.01 decades: 10%Temperature coefficient100 p.p.m./C50 p.p.m./C

Spiraband Mandrel An expanding rubber mandrel expands when in use to grip an abrasive spiraband 6mm diameter shaft Accepts 25mm wide bands Note Minimum speed is that required to effectively expand the mandrel in use.

Stainless Steel Cable Ties These stainless steel cable ties are an ideal alternative where nylon cable ties are not suitable. 316 Stainless steel has excellent resistance to abrasion, corrosion, radiation, weathering and extremes of temperature. They have a greater load carrying capacity and may be used for general strapping applications. Features and Benefits • Available in uncoated and polyester coated stainless steel • Flame retardant • High tensile strength • Self-locking design • Excellent resistance to high temperature, chemicals, weather and abrasion Applications Suitable for applications in industries such as oil and gas, marine, chemical and maintenance. Approvals ABS, DNV, Lloyd's, UL Standards IEC 62275 (2006), UL-1565

The sauter regulation VUT010F200 is a 2-way valve having a regulation of fan coil units. Nominal pressure =PN 16 Valve characteristic =Almost linear

JUMPER SXH-001T-P0.6 X2 10"

FLOATSWITCH HORZ .6A POLYPROP

Hi-torque Hose Clip Heavy-duty Hi-torque™ hose clips Made from A2 Stainless steel Suitable for tough and wire-reinforced hoses Higher sealing pressures due to the ability of being tightened to more than twice the torque of ordinary clips 8mm slotted hex securing screw Recommended torque=15Nm

MC1, Coded Non-contact actuation Magnetic coded sensing High tolerance to misalignment 2 N/C reed safety outputs Switching current: 200 mA @ 24Vdc IP67 protection rating Category 1 device per EN 954-1, dual channel contacts suitable for Cat 3 or 4 systems Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC60947- 5-1, IEC/EN60947-5-3, ANSI B11.19, AS4024.1

AC Over-Door Heaters (Warm Air Curtains) Designed for localised heating around open doors Can be used as a high level fan heater Adjustable airflow direction Full heat, half heat and fan-only settings Designed for single doors Optimum mounting height 1.8 to 2.3 m

25W 80x80mm Panasonic 3 Series Gearboxes Dimensions Motor Size Motor Power Combination Body Length with 25W motor* Gearbox Shaft Length** Gearbox Shaft Diameter Gearbox Output Shaft Type 80 x 80mm 25W 115mm 26mm 10mm Key *Body length is from front of gearbox to back of the motor. **Shaft length is not including bearing housing dimension. Dimension is 32mm from end of shaft to front face of gearbox. Ratio Gear Output Speed (rpm) with motor speeds between 1225 and 1350rpm Direction of rotation same as motor? Output Torque (Nm) with 25w motor Stock no. 3:1 408.3 - 450 Yes 0.39 624-4486 5:1 245 - 270 Yes 0.66 624-4492 10:1 122.5 - 135 Yes 1.27 624-4515 15:1 81.66 - 90 Yes 1.96 624-4509 20:1 61.25 - 67.5 Yes 2.55 624-4521 30:1 40.8 - 45 No 3.82 624-4543 50:1 24.5 - 27 No 6.37 624-4565 100:1 12.25 - 13.5 No 7.84 624-4537 120:1 10.2 - 11.25 No 7.84 424-055 150:1 8.16 - 9 No 7.84 424-065 180:1 6.8 - 7.5 No 7.84 424-027 Note Panasonic 3 Series 25W Gearboxes can only be used with Panasonic 3 Series 25W Motors. Panasonic 3 Series Motors and Gearboxes Panasonic 3 Series Motors, with identical mounting dimensions as the G Series, replace and offer the following benefits over G Series Motors: Grease-lubricated gearboxes 10000hr life Quiet operation Class B motor insulation A number of additional design changes include: A number of gearboxes with shorter gearheads Different motor shafts (non-interchangeable with G Series gearboxes) Note Panasonic 3 Series Motors can only be used with Panasonic 3 Series Gearboxes. Approvals UL, CE and CCC

SRB-EXi, ATEX Safety Relays A new generation of safety relay modules that combine the approved safety technique with the demands of explosion protection. Designed for equipment of the category 2GD. Emergency stop devices and safety door monitors may be used in gas and dust explosive atmosphere. Suitable for emergency stop control devices and guard door monitoring 1 or 2 channel control Optional cross short monitoring Current and voltage limitation of input - intrinsically safe Green LED display

Mobrey Level Switch The Mobrey ultrasonic liquid level switch with polyphenylene sulphide construction has output type integral SPCO relay (energised when the sensor is wet) and 1-in BSPT dual mount thread. This switch is designed for high or low-level alarm duties to give a voltage-free contact or solid-state transistor output for alarm signalling or as part of a pump control system. It is intended for level detection at a fixed point when liquid fills the gap between the crystals. The supply voltage ranges between 18VAC/DC and 30VAC/DCNote:If the liquid to be monitored is flowing, the device should be fitted with the gap inline with the flow. In storage tanks, it should be fitted with the gap vertical unless the liquid is highly aerated when it should be angled.Features and Benefits Vessel pressure of 5bar (maximum)Wet switching level detection at a fixed point when liquid fills the gap between the crystalsSwitched voltage is 30VDC (maximum)Suitable for low maintenance applicationsHigh reliability with no moving partsNot easily subject to fouling and not affected by ambient light conditionsFitted with three metres of cableLightweightNo moving partsMounting types are horizontal and verticalApplications Low level alarms in header tanksPump control duty in feeder tanksHigh and low alarms in storage tanksLevel and pump control in storage tanksSmall or thin wall tanksBund level detectionSteering gear oilCertifications NEMA 6P (10ft.)/IP66/IP68 (3m)