Discounted Products

The Facom nylon rods is supplied with 1 flexible guiding head and 1 pulling eye. Breakage load 120 kN Diameter 4 mm

Low Smoke Halogen Free Single Core Cable - H05Z-K A flexible low smoke halogen free single core cable for internal wiring Intended for installation within conduits and trunking, as well as internal wiring within appliances and fittings Can be used in all areas where in an event of fire a protection of people and equipment is paramount Flame retardant in accordance to IEC 60332-2-2 Smoke density in accordance to IEC 61034 Halogen free in accordance to IEC 60754-1 Working voltage 300/500V Test Voltage 2000Vac Temperature range -15°C → +90°C

The Sub 1040-FS is a submersible pump built with a powerful 400w motor encased in tough housing. A float switch protects against running dry. Suitable for trade and domestic applications. 230v (13amp) input supply Powerful and durable 400w motor 8 metre maximum pumping head size 150 litres/min maximum water flow rate Float switch protects from running dry 25mm Ø to 40mm Ø / 1" BSP outlets 5.0mm maximum particle diameter 10 metre standard cable length Highly durable plastic housing

IC MOD OMAP-L138 375MHZ 64MB

OsiSense XMX Pressure Switches Schneider Electric XMX series pressure switches for control circuits, with an adjustable differential. They are used to control the pressure of water and air, up to 25 bar. Adjustable differential 1 CO snap acting contact Temperature range: –25 to +70 °C Enclosure rating: IP54 Note Pressure switches type XMX have an internal setting screw that is only accessible after removing the cover.

TIMER SS MULTI ANLG 8P NPN DPDT

RELAY GEN PURPOSE DPDT 10A 220V

SEALED TOP PLUNGER SWITCH

DIN 41622 Double Row Connectors 8,12,16,20 and 30 ways available Male and Female variants

COUNTER, 240V, 50/60HZ MODEL NO. D96HR 240V HOBUT: D96HR 240V

CBL CLAMP P-TYPE BLACK FASTENER

THERMOSTAT SPST-NC 50C 9A .250QC

CUB4V LCD voltmeter, 3.5 digit, 200 V, 15 mm character height 3.5 digit, 15 mm bright display Automatic offset correction Freely selectable decimal point Free scaling via potentiometer Protection class IP65 Four input ranges: ±199.9 mVdc, ±1.999 Vdc, ±19.99 Vdc or ±199.9 Vdc (Ri = 1 MΩ) selectable using DIP switch. Protection: 199.9 mVdc, range: 75 Vdc. All other ranges: 300 Vdc Display capacity: Standard LCD or lit with a red or green background. Minus (-) and overrun displayed. Decimal point can be set using DIP switch Accuracy: ±(0.1 % + 1 digit) at 23 °C and 85% RH. Power supply: Standard LCD display: Max. 9 → 28 Vdc 4 mA Lit display: Max. 9 → 28 Vdc 50 mA Measuring rate: 2.5 measurements/s Stabilisation time: 1.5 s Housing: High-impact plastic housing. Dimensions (W x H x D): 75 x 39 x 50 mm Panel cut-out: according to DIN: 68 x 33 mm Mounted with mounting frame Connection: Screw connections Cross-reference to manufacturer's part number Stock no. Wachendorff part no. Description 388-5422 CUB4V000 Standard LCD 388-5450 CUB4V010 Green LCD 388-5472 CUB4V020 Red LCD Approvals UL, CSA LCD 5.5 to 19mm Digit Height All have an operating temperature range of 0 to 50°C unless specified otherwise.

HuskyLens Pro is an easy-to-use AI machine vision sensor with 6 built-in functions: face recognition, object tracking, object recognition, line following, color detection and tag detection. Through the UART / I2C port, HuskyLens can connect to Arduino, Raspberry Pi, or micro:bit to help you make very creative projects without playing with complex algorithms.

HV Vacuum Encapsulated D Series These high voltage PCB and panel mount reed relays have high isolation voltages of up to 15kV. Applications include test equipment and high voltage power supplies. All models are highly reliable and are of extremely good quality. High power switching Through hole PCB & panel mount or flying lead versions 15kV high isolation versions available Tungsten contacts enable high voltage switching

Euronord Polycarbonate Enclosures Features and Benefits Typical Applications What is Supplied?

EL-GFX-2+ High Accuracy Temperature/RH Data Logger with Graphic Screen The EL-GFX-2+ standalone USB data logger measures and stores up to 252,928 temperature and humidity readings over a -30 to +80°C (-22 to 176°F) and 0 to 100%RH range at a resolution of 0.1°C (0.1°F) and 0.1%RH. Using the Windows control software (available as a free download from www.easylogusb.com) the user can quickly set up the logger name, sample rate, alarm settings and start mode (immediate start, push to start, delayed start or temperature/humidity triggered start). This software can later be used to download the stored data which can be graphed, printed and exported to other applications. The data logger features a dot-matrix LCD and three face-buttons to navigate through an on-screen menu. This menu provides the user with access to real-time trend analysis, data summaries and the ability to start, stop and restart the data logger without the need to connect the data logger to the host-PC. Users can reset the maximum/minimum reading using the on-screen menu; this introduces an ’event marker’ into the data which can later be viewed in the graphing software (’Mark Events’ option) and the data file after download. Higher accuracy sensor when compared with the EL-GFX-2 -30 to +80 °C and 0 to 100% RH measurement ranges Rugged and robust, IP67 construction Immediate, delayed, push-button or temperature/RH triggered start mode Logging rates between 10 seconds and 1 hour Stores more than 250,000 readings On screen menu and graphing to start, stop, review and restart the logger in the field Micro USB interface for PC based set-up and data download User-programmable alarm thresholds Graphic LCD shows real-time readings, graph and current status Resettable Min/Max readings may be viewed on the LCD User-set audible alarm Highly visible confidence/alarm LEDs Supplied with AA replaceab...

High Impact IP67 Pushbutton Switches The 76-94 Series from ITW, have been designed to cover a wide range of harsh environmental applications. Such as:- • Military Environments • Robust Industrial • Vandal resistant requirements • Mining Industries • Petrochemical • Process control • Material Handling Features and Benefits • The range is available in 3 styles, push-button, rotary and panel lamp. • Push-button comes in 4 button styles with 3 colour options and has solder/faston terminals as standard. • The rotary is a single pole, 2 position, snap action switch with green or red spot indicator on the black actuator. • The indicator version is available with a red, green or amber lens. • Panel sealed to IP67 and due to the construction and the materials used, are all capable of surviving the impact of approximately a 5 kg mass dropped from 40 cm (20J). (IP67 - totally protected against dust and protected against the effects of temporary immersion between 15 cm and 1 m. Duration of test 30 minutes). • The bezels and the actuators have been designed from non- sparking zinc alloy. • Explosive-proof material used. Note These switches are not positive break types and should not be used for emergency stop applications.Accessories listed are not ITW products. Suitable wedge base lamps include 106-357 , 655-9637 , 655-9665 .

OSC XO 24.576MHZ CMOS SMD

Fluke Multimeter Test Leads and Probes Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories.