Discounted Products

The Rockwell Automation Multi-Function Timing Relay has SPDT contact arrangement with 0.050 seconds to 9999 hours timing range. It is NEMA B300 and NEMA 4/IP66 rated. Socket or panel-mounted It is environmentally friendly

Triple Deck with Grounding Provides 3 circuits within the same terminal width and a clamp electrically grounded to the mounting rail Ideal for use in the supply of 3 -phase motors with protection Blocks are closed therefore do not require end section Comb facility eases wiring by being placed in the insulating support and remaining captive when clamp is loosened IP20 protection Approvals 7777

Tygon® Fuel & Lubricant Tubing F-4040-A Extremely flexible, compatible with most petroleum based products Resists embrittlement, swelling, cracking & hardening Resistant to Ozone & UV light Applications vary from small engine fuel lines to coolant transfer

CAP ALUM 220UF 20% 350V RADIAL

Single Plug and Socket Suitable for 12 to 24V d.c. car, boat and caravan electrical systems, these universal plugs and sockets provide quality connections for any number of uses to power portable equipment. Plugs are 8A or 16A rated and fit DIN ISO 4165 socket outlets. The red adaptor allows the plug to fit car cigar lighter sockets. Fused (standard car fuse) and unfused types available Screw termination Integral cable clamp & separate strain relief boot Cable mount and panel mount socket (DIN ISO 4165) with 6.3 ´ 0.8 tab connections (panel mount dimensions 18.5mm dia.) Note Similar in concept to an automotive cigar lighter, the DIN 4165 connector is shorter and smaller than the Standard Cigarette Lighter Socket normally found in cars.

BLUE 125VAC/0.28ATUBULAR PROXIMI

OEP 25W to 65W Single/Triple Output Switch Mode Desktop Power Supply - PSU & SPU Series External switch mode power supply Protected against short circuit, overload, over voltage and over temperature LED indication of power on Fully enclosed plastic case EMI emission levels meet FCC Class 'B' 3-pin IEC320 universal input Fitted with approx. 150cm output lead terminated with DIN connector Note Non Compliant For Industrial Use Only, not in scope of Regulation (EC) No 125/2009 Approvals UL listed / UL listed for Canada, TUV

CAP ALUM 1UF 20% 50V RADIAL

TOOL HAND CRIMPER 22-24AWG SIDE

Tesa® 4334 Precision Masking Tape When you need a reliable masking tape that can be removed easily, then the Tessa 4334 precision masking tape is a perfect solution. The tape has been designed to give you a professional, razor sharp finish on all your indoor paint or lacquer jobs. The precision masking tape is low tack and comes in 50 m lengths. Features and Benefits Easy to remove up to 5 months after application Gives precise, razor sharp edges Can use even with water-based paints Can be used on rough surfaces Tear resistant No paint bleed Typical Applications All indoor paint work Glass Rigid PVC

Male Connector KQ2H The KQ2H male connector fittings from SMC are quick and easy to install into your pneumatic fittings. These KQ2H male connectors are also more compact in design which means that these connectors can be used within a confined space. Male connectors are designed to pipe a female thread. The new KQ2 range of products are lighter than previous models and have the advantage of improved insertion and removal forces. Can be used under a wide range of pressures from a low vacuum to 1MPa Low force required for fitting and removal Compact dimensions for use within smaller spaces Various port size's available One-touch Unifit versions available Available with thread sealant Thread-to-Tube Adaptors Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C) All thread sizes are specified as R(PT) (taper) type

IP68 Deltron 486 Series Diecast Aluminium Boxes Lid is designed to give maximum seal face and minimum exposure Lid supplied with stainless steel (SS304) M6 x 25mm long captive screws 3mm one piece die cut silicone rubber sponge seal (01-255FR) with self adhesive backing (01-255SAB), suitable for-60 to 240°C Minimum seal thickness and seal frame width 3.5mm Minimum enclosure wall and lid thickness 3mm Integrated PCB guides and standoffs Integrated earth fixing points and is supplied with brass shake proof screws Note MPNs that have the suffix 486-xxxxxx-66 are sealed to BS EN 60529:1992 IP66 / IP67 MPNs that have the suffix 486-xxxxxx-68 are sealed to BS EN 60529:1992 IP67 / IP68 (10mtrs for 20 hours)

The brennenstuhl portable floodlight with enormous luminosity thanks to built-in COB LEDs also has a battery status display for the remaining energy of the batteries used (the batteries are to be charged externally) and a protection system for Power-Tool batteries. This protects the batteries from deep discharge and overheating. LED Work Light with tilt protection, protects lens and housing of the spotlight Ergonomic handle Tripod mounting possible

The Keysight Technologies 11716A quickly and conveniently connect 1 dB step and 10 dB step attenuators together to achieve greater dynamic range with 1 dB steps. The Keysight 11716A interconnect kit contains a rigid RF cable, mounting bracket, and necessary hardware to connect any pair of Keysight 8494 or 5 or 6 or 7 attenuators in series. Attenuators must be ordered separately. Provides wide attenuation range with 1 dB steps Connects any pair of Keysight 8494 or 5 or 6 or 7 attenuators in series

High specification degreaser for electrical & electronic componentsPowerful citrus degreaser for difficult contaminants such as flux, solder mask and adhesives from electrical components and equipment. Designed to degrease PCBs and equipment, it will also remove electrical greases from rewinds and motors. Formulated to a high di-electric strength 53,000v. Low volatility. Flashpoint 45 C. Special Order Item Extended Lead Times & Minimum Order Quantities.

IEC DISTRIBUTION UNIT

SWITCH SNAP ACT SPDT 100MA 125V

RS Pro Bootlace Ferrules (French Colours) Made from a reliable bright tinned copper with PP insulating sleeves, offering you the reliability and reassurance required for all your wire termination needs. We offer a range of different-sized boot laced ferrules to accommodate your requirements.Features and benefits: Offers up to 100% contact between your crimped wire stands and your end contact point Stops your wire strands from spreading out upon contact with the contact point (vs. a wire strand not boot laced as these may spread due to pressure at the contact point, losing you up to 50% contact. Boot laced wire strands are easy to repurpose and re use elsewhere (useful if you need to move the wires around often). Once the boot lace has been crimped using the appropriate tool, it offers great protection from corrosion commonly caused by oxygenation or moisture. The boot lace helps you keep your wire strands separate from other terminals or connections close by, reducing any risk of damaging any surrounding equipment. Easier to guide the crimped wire strand if it has a narrow boot lace into its intended contact point as the typical narrow points easily slots into place (vs. wiring that may fray if accidental contact occurs, making it more time consuming to re position the frayed wiring ends). Large range of French colours are available to choose from offering you a wider choice of wire sizing.Applications: Power distribution panels Terminal blocks Captive terminalsNote Length quoted is Pin Length

Strip Brushes Manufactured from black Nylon 6 filament Encased in an electrogalvanised mild steel channel and housed in an extruded mill finished aluminium alloy carrier Operating temperature range -50°C to +100°C and resistant to most common solvents Available in most thicknesses with different filament lengths Easily cut using a hacksaw and bolt cutters (see stock no. 539-069 ) Instructions supplied with the product Supplied in 1 metre lengths Length in Specifications refers to Bristle Length Dimensions (mm) Stock No Angle F H T W Filament Dia 326-9791 180 ° 8.5 6 1 5 0.15 326-9808 90 ° 9.3 6.7 1.2 6.7 0.15 326-9814 180 ° 8 6.3 1 6 0.15 326-9836 180 ° 12.8 7.7 1.3 7.8 0.15 326-9842 90 ° 11 7.9 1.5 7.6 0.15 326-9858 180 ° 13.4 8.1 1.2 7.6 0.15 326-9870 90 ° 11 7.9 1.5 7.6 0.2 326-9886 45 ° 16.5 6.7 1.2 6.5 0.2 326-9820 180 ° 13.4 8.5 1.5 7.6 0.2 326-9892 90 ° 11 7.9 1.5 7.6 0.2 326-9909 180 ° 12.8 7.7 1.3 7.8 0.2 326-9915 90 ° 11 7.9 1.5 7.6 0.2 326-9937 180 ° 20.4 13.6 1.8 12.1 0.4 326-9943 90 ° 19 13 1.5 12 0.4 326-9959 45 ° 25 13.2 1.6 12 0.4 326-9965 180 ° 20.1 13.6 1.8 12.1 0.4 326-9971 90 ° 19 13 1.5 12 0.4 326-9987 180 ° 19.1 13.6 1.8 12.1 0.4 326-9993 90 ° 19 13 1.5 12 0.4 327-0000 180 ° 19.14 13.5 1.5 13.2 0.6 327-0016 180 ° 19.1 13.5 1.5 13.2 0.9

Mini Sureseal cable receptacle From ITT Canon this Mini Sure-Seal connector receptacle is available to suit 2,3 or 4pin/socket combinations and is designed for easy and reliable mating to corresponding Mini Sure-Seal connectors. The one-piece moulded body is rated to IP67, meaning an excellent degree of protection against water and dust, resulting in a connection that is highly suited to industrial and automotive applicationsDimensions (mm)WaysAC28.213.438.814.348.815Note Contacts must be ordered separately see stock numbers:341-3033 male or341-3049 female.For the necessary tooling see stock number167-9534 typical.Plug & receptacle materialPerbunan or Nitrile-Butadiene rubberContact materialTin-lead plated copper alloyCurrent rating16A per contactContact resistance10m max.Insulation resistance100M min.Dielectric withstanding voltage1200Vac at sea levelOperating temperature-40C to +105CSealingIP67 acc. to DIN 40050Durability50 cycles mating & unmatingSalt sprayMIL-STD-202D Method 101 DHumidity95% at 95C for 1000 hoursIndustrial gasEquivalent to MIL-C-23216Technical specificationPlug and receptacle materialPerbunan or Nitrile-Butadiene rubberContact materialCopper alloy, tin lead plateCurrent8AContact resistance10m max.Insulation resistance100M min.Operating temperature-40C to +105CEnvironmental sealingIP67 (DIN 40050)Durability50 cyclesSalt sprayMIL-STD-202D, method 101DHumidity95% at 95C/1000 hoursIndustrial gasMIL-C-23216