Robin-Amprobe

KMP7036 Insulation Tester The KMP7036 Insulation-Continuity Tester is used for accurately measuring the insulation of electrical equipment, ensuring that electricity has a direct path to flow safely and there is no risk to those around the area. The Isolation Tester can test cables, wires, transformers, electrical motors and other similar devices to evaluate if insulation breakdown has become excessive; if so, steps can be taken to fix the problems long before they become a significant danger. Tests insulation of wires, cables, transformers and electrical motors Selectable test voltages 250V, 500V and 1000V Test button hold to perform the Dielectric Absorption Ratio Test Continuity test at 200mA short-circuit Built in voltmeter and red light warning for live circuit indication Large, backlit display Automatic discharge of test object after completion of measurement Data Hold Test lead resistance zero facility Low battery indication Safety CAT III 600V Supplied with 2 x test leads, 2 x test probes, 2 x alligator clips, 6 x AA batteries, user manual, carry case and strap

KMP7030 Loop Impedance Tester Using the KMP7030 Loop testing is a quick, convenient, and highly specific method of evaluating an electrical circuit for its ability to engage protective devices (circuit breakers, fuses, RCD's).A "loop" is defined by including unsuspected elements, where current has found parallel paths to ground. Because a ground loop determines the effectiveness of protective devices, it is crucial to be able to measure it, in order to detect and correct problems. Non trip loop test on passive RCDs Instant reading 20, 200 and 2000Ω loop measurement ranges PSC measurement up to 20kA Displays mains voltage before test Instant correct wiring status check Backlight display Low battery indication CAT III 300V Supplied with Mains test cord, test lead set with IEC connector, test probe set, alligtor clip set, batteries (8 x AA), user’s manual, strap and carrying case

KMP7021 Digital RCD Tester The RCD tester is simple to use device designed to check for correct operation of RCD devices. It features three levels of trip currents with Ramp Test for complete range of testing applications. Three levels of trip currents (X1/2, X1, X5) for complete range of testing applications Ramp test 3-LED proper connection indicator Phase switch selection 0° and 180° for positive and negative semi-cycle testing Large display Safety CAT III 300V Supplied with 3-Wires mains test cord, test lead set with leads/probes/alligator clips, users manual, strap and carrying case.