Deliver to
United Kingdom
The CHIPQUIK 15 g syringe lead-free solder paste is a quality soldering paste that fits PCB and prototype PCB assembly by applying it to the board, ensuring effective results.
The CHIPQUIK SMD291SN is a unique lead-free solder paste supplied in a 5-cc syringe (15 g) with a plunger and nozzle for easy soldering, reworking, and desoldering applications. This no-clean solder paste features a robust 100 mm/sec printing speed, low voiding, and a melting point of 138 °C. The paste also provides superb wetting compatibility on the majority of board finishes and offers excellent compatibility with print heads (enclosed). Moreover, the product offers long stencil life and has a wide process window for extended life. In addition, this adhesive paste is appropriate for connecting circuit boards, PCBs, and PCB assemblies, providing shiny and smooth solder joints.
Why Buy a CHIPQUIK 15g Syringe Lead Free Solder Paste?
The benefits of Chipquick’s 15g syringe lead-free solder paste include the following:
Is It Best to Use Lead-Free Solder Paste for Electronics?
Of the two types of solder paste, lead and lead-free, it is best to use lead-based solder for electronics, unlike acid-core solder designed for plumbing applications. However, lead-free solder pastes are also appropriate for electronics.
How Should I Apply CHIPQUIK 15 g Solder Paste Syringe?
Put a small amount of Chipquik’s solder paste on your desired product/item by applying a little pressure on the syringe plunger. Place the product by passing it to the product to be soldered. The paste features adequate tension to hold the components. Ensure to apply the proper amount of paste to avoid deterioration or poor joints.
Are There Any Handling and Storage Requirements for CHIPQUIK 15g Solder Paste Syringe?
There are a few storage and handling essentials, including:
Avoid solder paste freezing and refrigerate at 3–8 °C. It is recommended that solder paste be allowed to reach an operating temperature of 20-25°C for 4 hours before use.
For more information please check the datasheets.
This flux works great! I bought two Wii controllers off eBay that didn't work and traced the problem to the Bluetooth chips. The solder joints underneath had cracked so I sprayed some of this flux around it and covered everything else with aluminum foil then hit it with the heat gun for about 40 seconds until the stream started bubbling and zapping like magic. I had two that worked. controllers! I've used this flow for a few other projects as well and it flows well and makes good ties. The applicator seems to be just the right size, not too big for fine enough work and not too small to clog. I've had it for about two months and it seems to be holding up well. I would definitely recommend it to anyone who welds or reworks surface mount components.
Basket Total:
£ 0
