Deliver to
United Kingdom
The P 1008 M10 is a refined channel nut designed and manufactured by Unistrut for M10 threads. Made of steel, it is secure, durable, and ideal for structural applications.
A channel nut, also known as a spring channel, is used for tightening and locking applications across a wide range of channel support systems. It has a narrow rectangular base and has grooves along its edge with small gripping teeth within the grooves. Through the center of the nuts, there is a threaded hole. The plain channel nuts consist of a tapped hole in the middle. Furthermore, spring channel nuts also consist of a small spring attached to the lower side of the tapped hole. Channel nuts are convenient metal fixings effectively used with slotted and plain Unistrut channel nuts and metal channel support systems. In addition, the product is available in either galvanized steel or stainless steel.
The bespoke product carries unique features, including:
Channel nuts are embedded lengthways into the focal box of the metal struts. Turning the nut 90° adjusts the grasping teeth to the inside collapsed edges of the struts. Whenever a strung nut or fastener is presented and fixed, the grasping teeth nibble into the edge of the channel, getting it set up.
These extremely strong nuts are constructed from a range of sturdy and durable materials, including:
Channel steel nuts can be found in the following shapes.
Channel steel nuts are classified into plain, long, and short spring channel nuts.
Strut channel nuts are typically used to:
For more information please check the datasheets.
These are good Channel nuts that should last a long time. The springs are strong but easy to handle. This makes the job of creating DIY mount points easier. They work great on the side rails. The studs at the front of the truck (just behind the cab) aren't deep enough, so I cut out the studs to use the nuts instead. They just do what they have to do and there is not much to say about them.
Basket Total:
£ 0