Interface

Digital I/O Board PCI-2702C PCI digital I/O board Uninsulated, high-speed I/O I/O handshake function included External interrupt input possible Common I/O terminal With external reset input/output function Interval timer included Digital input TTL Schmitt input Input signal voltage 5 V Input current 0.9 mA Input response time 0.1 μs I/O contact 64 shared I/O points Digital Output TTL open collector output Output signal voltage 5 V Maximum output current 40 mA Output response time 0.5 μs Output control signal STB, ACK Connector cable (option) Model name: CAB-6401, Cable length: 1 m 96-pin half-pitch (female) - rainbow splice OSs supported Windows, Linux, DOS PCI Serial Boards/RS-232 PCI Bus: High performance I/O slot in every desktop Pentium, Pentium (II) and Pentium Pro PC. PCI provides improved performance to all running applications by freeing up the CPU.,PCI boards are detected and configured automatically by the PC, avoiding conflicts in address and interrupts. PCI boards automatically implement a shared interrupt system so maximising use of precious system resources.,The Windows device drivers supplied with each serial card reads the PCI assigned setup and configures your system accordingly. Products in this range are supplied with Vista and Windows drivers and are Plug-and Play compatible.,PCI 2.3 requires that all plug-in cards support 3.3V signalling. To support many older systems that use 5V signalling the following Brainboxes products are compatible with both 3.3V and 5V signalling.All the boards in this range also share the same following specifications: Data bits: 5, 6, 7 or 8 Stop bits: 1 or 2 Parity: Odd, even, mark, none or spaces

Relay Output Board PCI-2503 8-pair high-current control relay output PCI board Independent insulation between channels Reset output function Interval timer function Relay structure 1a1b contact x 8 Relay specifications Max. output current 3 A, AC 110 V, DC 30 V High capacity 330 V A, 90 W Connection cable (optional) Model: CAB-4102H, cable length: 2 m 37-pin D-sub (male)- Connecting cable with loose wires OSs supported Windows, Linux, DOS PCI Serial Boards/RS-232 PCI Bus: High performance I/O slot in every desktop Pentium, Pentium (II) and Pentium Pro PC. PCI provides improved performance to all running applications by freeing up the CPU.,PCI boards are detected and configured automatically by the PC, avoiding conflicts in address and interrupts. PCI boards automatically implement a shared interrupt system so maximising use of precious system resources.,The Windows device drivers supplied with each serial card reads the PCI assigned setup and configures your system accordingly. Products in this range are supplied with Vista and Windows drivers and are Plug-and Play compatible.,PCI 2.3 requires that all plug-in cards support 3.3V signalling. To support many older systems that use 5V signalling the following Brainboxes products are compatible with both 3.3V and 5V signalling.All the boards in this range also share the same following specifications: Data bits: 5, 6, 7 or 8 Stop bits: 1 or 2 Parity: Odd, even, mark, none or spaces

GP-IB Interface Board, PCI-4301 PCI-GP-IB Interface Board Complies with IEEE488 standard Low power consumption With GP-IB access status display LED No. of channels 1 Transfer method Bus master DMA transfer Max. transfer speed 1.1 Mbyte/s Connector cable (option) Model name: CAB-2220, Cable length: 2 m GP-IB connector-GP-IB connector cable OSs supported Windows, Linux, DOS PCI Serial Boards/RS-232 PCI Bus: High performance I/O slot in every desktop Pentium, Pentium (II) and Pentium Pro PC. PCI provides improved performance to all running applications by freeing up the CPU.,PCI boards are detected and configured automatically by the PC, avoiding conflicts in address and interrupts. PCI boards automatically implement a shared interrupt system so maximising use of precious system resources.,The Windows device drivers supplied with each serial card reads the PCI assigned setup and configures your system accordingly. Products in this range are supplied with Vista and Windows drivers and are Plug-and Play compatible.,PCI 2.3 requires that all plug-in cards support 3.3V signalling. To support many older systems that use 5V signalling the following Brainboxes products are compatible with both 3.3V and 5V signalling.All the boards in this range also share the same following specifications: Data bits: 5, 6, 7 or 8 Stop bits: 1 or 2 Parity: Odd, even, mark, none or spaces

Serial Communications Card CSI-466120 RS232C-CardBus Serial Communications Card Modem control functionality included Compatible with Windows standard COM ports FIFO system for high-speed communications (1024 bytes sending, 1024 bytes receiving) Transfer speed adjustable via software Software flow (XON / XOFF) control functionality included Hardware flow (RS / CS flow) control functionality included Compatible with Win32 serial-communications API No. of channels 2 Max. transfer speed 1 Mbps Max. communication range 15 m OSs supported Windows, Linux Connector cable (option) Model name: CWB-3025RU, Cable length: 0.25 m 68-pin 0.8 mm-pitch connector (male) - 9-pin D-sub connector (male) ´ 2

Analogue Input Board PCI-3133 12-bit, 16-channel PCI analogue input board External trigger supported External clock supported External interrupt input possible General-purpose I/O built in Multiple board syncing supported Degradation ability 12 bit Max. sampling rate 100 kSPS No. of channels Single end 16 channels, differential 8 channels Input range Unipolar: 0 to 5 V / 0 to 10 V Bipolar: ±5 V, ±10 V Connector cable (option) Model: CAB-8601, cable length: 1 m 50-pin half-pitch connector - loose-wire crimp connection cable OSs supported Windows, Linux, DOS, LabVIEW PCI Serial Boards/RS-232 PCI Bus: High performance I/O slot in every desktop Pentium, Pentium (II) and Pentium Pro PC. PCI provides improved performance to all running applications by freeing up the CPU.,PCI boards are detected and configured automatically by the PC, avoiding conflicts in address and interrupts. PCI boards automatically implement a shared interrupt system so maximising use of precious system resources.,The Windows device drivers supplied with each serial card reads the PCI assigned setup and configures your system accordingly. Products in this range are supplied with Vista and Windows drivers and are Plug-and Play compatible.,PCI 2.3 requires that all plug-in cards support 3.3V signalling. To support many older systems that use 5V signalling the following Brainboxes products are compatible with both 3.3V and 5V signalling.All the boards in this range also share the same following specifications: Data bits: 5, 6, 7 or 8 Stop bits: 1 or 2 Parity: Odd, even, mark, none or spaces

Digital I/O Board CSI-293166 CardBus digital I/O board 48-point CMOS high-voltage connection input (with pull-up resistance) 48-point TTL open collector output (with pull-up resistance) 48 shared I/O points Uninsulated, high-speed I/O External power not required Includes diode to protect against excess voltage Input signal voltage 5 to 24 V dc Maximum specified input voltage 30 V dc Input current 1.1 mA Input response time 0.1 μs Output signal voltage 5 to 24 V dc Maximum output current 40 mA Output response time 1 μs OSs supported Windows, Linux Connector cable (option) Model name: CWB-5415U, Cable length: 1.5 m 68-pin 0.8 mm-pitch connector (male) cutoff cable

Serial Communications Board, PCI-4155 RS232C-PCI Serial Communications Board Installed with LSI16550-compatible PC16552V Compatible with Windows standard COM ports FIFO embedded, making high-speed communications possible Transfer speed adjustable via software Uses 9-pin D-sub connector Compatible with Win32 serial-communications API No. of channels 2 Max. transfer speed 921.6kbps Max. communication range 15 m OSs supported Windows, Linux, DOS PCI Serial Boards/RS-232 PCI Bus: High performance I/O slot in every desktop Pentium, Pentium (II) and Pentium Pro PC. PCI provides improved performance to all running applications by freeing up the CPU.,PCI boards are detected and configured automatically by the PC, avoiding conflicts in address and interrupts. PCI boards automatically implement a shared interrupt system so maximising use of precious system resources.,The Windows device drivers supplied with each serial card reads the PCI assigned setup and configures your system accordingly. Products in this range are supplied with Vista and Windows drivers and are Plug-and Play compatible.,PCI 2.3 requires that all plug-in cards support 3.3V signalling. To support many older systems that use 5V signalling the following Brainboxes products are compatible with both 3.3V and 5V signalling.All the boards in this range also share the same following specifications: Data bits: 5, 6, 7 or 8 Stop bits: 1 or 2 Parity: Odd, even, mark, none or spaces