H&D Wireless

10-pin RF header WiFi board The SPB105 is a complete WLAN card for evaluation and development on platforms like the Atmel EVK1105 using the AVR32 CPU. The SPB105 enables developers to evaluate and develop their own wireless applications based on the 802.11b/g standard compliant HDG104 and the feature rich AVR32 platform from Atmel. The HDG104 enables a cost efficient ultra low power, high performance and feature rich WiFi client solution. It provides up to 54Mbit/s data rate when operating in the OFDM mode and up to 11Mbit/s data rate when operating in the DSSS/CCK mode. Data Rates: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54Mbps Modulation: QPSK, 16QAM, 64QAM DBPSK, DQPSK, CCK, OFDM with BPSK WEP and AES hardware encryption accelerator up to 128 bit On-chip RF filter for the ISM band 2.4GHz An internal 32kHz oscillator maintains real time in power save mode DMA hardware support for data flow to reduce CPU load. Ultra Low Power (ULP) technology On-board 160KB SRAM and 1KB EEPROM Internal Boot-ROM Advanced power management for optimum power consumption at varying load External interfaces SPI and UART Supply voltage: +2.75 to +3.6V WLAN (Wireless Local Area Network) - H & D Wireless

Surface mount WiFi board The SPB106 is an SMD module with the HDG104 WLAN System-In-Package and all peripheral components required. It is a complete solution designed to be surface mounted on any host system requiring 802.11b/g WiFi. It provides up to 54Mbit/s data rate when operating in the OFDM mode and up to 11Mbit/s data rate when operating in the DSSS/CCK mode. The host interface supports SPI communication when used with the 10-pin RF-header connection (WLESS), and SDIO when used in a custom board with the AVR32UC3A3. Software drivers and a complete application example are included in Atmel AVR32 UC3B Software Framework from release 1.5.0 onwards Data Rates: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54Mbps Modulation: QPSK, 16QAM, 64QAM DBPSK, DQPSK, CCK, OFDM with BPSK WEP and AES hardware encryption accelerator up to 128 bits Chip Antenna and connector for external antenna (optional) mounted on the board Low power consumption due to efficient class AB PA design UMA Compliant Advanced power management for optimum power consumption at varying load Bluetooth co-existence support Power Supply: +3.3V from EVK board Small footprint 25.8 x 20.6mm WLAN (Wireless Local Area Network) - H & D Wireless

SD-card format WiFi board The SPB104 is a complete WLAN card for evaluation and development of the 802.11b/g standard compliant WiFi component HDG104 from H&D Wireless. This highly integrated solution is optimized for customer applications running on a host CPU. The host interface supports SDIO and SPI. Internal RAM comprises both code and data memory eliminating the need for external RAM, Flash or ROM memory interfaces. Baseband firmware, FW, is stored on the host and downloaded at start up. MAC address, trimming values etc are stored in the on board EEPROM. Data Rates: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54Mbps Modulation: QPSK, 16QAM, 64QAM DBPSK, DQPSK, CCK, OFDM with BPSK WEP and AES hardware encryption accelerator up to 128bit On-chip RF filter for the ISM band 2.4GHz Internal 32kHz oscillator maintains real time in power save mode DMA hardware support for data flow to reduce CPU load Uses Ultra Low Power (ULP) technology On-board 160KB SRAM and 1KB EEPROM Internal Boot-ROM Advanced power management for optimum power consumption at varying load. External interfaces including SDIO and SPI Supply voltage: +2.75 to +3.6V WLAN (Wireless Local Area Network) - H & D Wireless