Bluegiga Technologies

DKBLE Bluetooth Development Kit with Carrier Boards The DKBLE is a Bluetooth Low Energy (BLE) development kit designed for engineers to evaluate Bluetooth Smart modules BLE112, BLE113 and BLE121LR.The DKBLE’s platform contains many switchable peripherals in order to create and test several different applications utilising Bluegiga Bluetooth Smart modules.The modules are assembled on a carrier board and DKBLE contains a header type of interface for plugging in the module carriers, this enables each module to be tested and compared with each other on the same platform. Features: On-Board debugger Switchable powering either from a coin cell battery or USB UART interface through USB to UART converter USB interface programming interface for upgrading the firmware and parameters Display connected to SPI Accelerometer connected to SPI Altimeter connected to I2C Potentiometer for ADC input Push buttons for 3 PIOs and reset All the signals available at test points Current measurement points for measuring

WT12 Class 2 Bluetooth® Module Bluetooth Class 2 Integrated chip antenna Enhanced Data Rates (EDR) with data throughput up to 2-3Mbps Support for Adaptive Frequency Hopping (AFH) and 802.11 co-existence USB version 2.0 UART with bypass mode 8Mbits of flash memory Simple iWRAP™ firmware for controlling Bluetooth wireless technology WT12 Evaluation Kit Class 2, Bluetooth 2.0+ EDR compatible WT12 module Unregulated power supply input form 5V to 9V RS-232 serial interface USB interface SPI for upgrading the firmware and parameters Reset and DSR buttons 2.5mm audio jacks for speaker and microphone 16 pin I/O interface

WT32i-A-AI6 Bluetooth Audio Module WT32i is an audio specific Bluetooth 3.0 module with radio frequency performance and enhanced audio features, allowing a best in class Bluetooth audio experience. WT32i comprises of Bluegiga's iWRAP6 Bluetooth stack software which implements A2DP, AVRCP v.1.5 profiles and supports aptX® and AAC audio codecs for stereo audio applications. Bluetooth 3.0 compliant Excellent Radio Performance Integrated chip antenna or U.FL antenna connector Analog, I2S, PCM, SPDIF, and microphone interfaces Optional aptX® and AAC stereo audio codecs Optional CVC® echo cancellation Wide Band Speech Built-in battery charger UART host interface 802.11 co-existence interface 10 software programmable IO pins Operating voltage: 1.8V to 3.6V Temperature range: -40C to +85C Bluetooth, CE, FCC, IC, Korea and Japan qualified Integrated iWRAP6 Bluetooth stack 13 Bluetooth profiles Apple iAP1 and iAP2 compatibility Features: Stereo speakers and sound bars Hi-Fi devices Hands-free kits Stereo headsets Applications:

BLE121LR Bluetooth 4.0 Smart Long Range Module The BLE121LR Bluegiga is a Smart Long Range Bluetooth module designed to be used in applications where paramount RF performance and range is required. At +8 dBm TX power and -98 dBm sensitivity the BLE121LR is able to provide Bluetooth Smart connectivity to a distance of up to 450 meters. The Bluetooth module incorporates all the essential features for a Bluetooth Smart application: Bluetooth radio, software stack and GATT based profiles and is capable of hosting end user applications, which in turn means there is no external micro controller required in size or price constrained devices. BLE121LR Bluetooth Smart Long Range Module has low power consumption and can be powered using a standard 3V coin cell battery. Bluetooth v. 4.0 Single Mode Compliant Integrated Bluetooth Smart Stack Best-in-Class RF Performance Low Current Consumption Flexible Peripheral Interfaces Host Interfaces: Programmable 8051 Processor for Stand-alone Operation Simple Bluegiga BGScriptTM scripting language for quick application development Bluegiga Profile ToolkitTM allowing the quick development of GATT based profiles Dimensions: 14.7 x 13.0 x 1.8 mm Bluetooth, CE, FCC, IC, South Korea and Japan qualified Applications: Smart home accessories Health and fitness sensors Medical sensors iPhone and iPad accessories Security and proximity tags

DKWF121 WiFi Evaluation Board for WF121 The DKWF121 is designed for evaluating the WF121 Wi-Fi module and as a basis for product development. The board contains connectors for easy development with a PC using the main host connections, USB and UART through a USB converter. Also present are headers for all the GPIO pads connected around a prototyping area for easy connection of pin headers with custom pinouts, sensors etc.

WF111-A WiFi Module with Antenna WF111-A Bluegiga is a fully integrated single 2.4GHz band 802.11 b/g/n module, intended for portable and battery powered applications, where Wi-Fi connectivity is needed. WF111-A integrates an IEEE 802.11 b/g/n radio, antenna or U.FL antenna connector and SDIO or CSPI host interfaces. WF111-A provides a low cost and simple Wi-Fi solution for devices that run an operating system and a TCP/IP stack on-board, but still offers the benefits of a module – small form factor, easy integration and certifications. WF111-A s a fully integrated single 2.4GHz band 802.11 b/g/n module, intended for portable and battery powered applications, where Wi-Fi connectivity is needed. WF111 integrates an IEEE 802.11 b/g/n radio, antenna or U.FL antenna connector and SDIO or CSPI host interfaces. Features: IEEE 802.11 b/g/n radio Single stream 2.4 GHz band Bit rates up to 72.2Mbps Integrated antenna or U.FL connector Hardware support for WEP, WPA and WPA2 encryption Soft-AP support SDIO or CSPI host interfaces Fully CE, FCC, IC, Japan and South-Korea certified Operating system drivers for Linux Applications: PoS terminals RFID and laser scanners Wi-Fi internet radios and audio streaming products Wireless cameras Portable navigation devices Portable handheld devices Wi-Fi medical sensors Wireless picture frames Note WF111-A is the WF111 module with and internal chip antenna and can be found using this RS stock number: 8977497. WF111-E is the WF111 module with U.FL connector for external antenna 8977490 and can be found using this RS stock numbe: 8977497.

WT12 Class 2 Bluetooth® Module Bluetooth Class 2 Integrated chip antenna Enhanced Data Rates (EDR) with data throughput up to 2-3Mbps Support for Adaptive Frequency Hopping (AFH) and 802.11 co-existence USB version 2.0 UART with bypass mode 8Mbits of flash memory Simple iWRAP™ firmware for controlling Bluetooth wireless technology WT12 Evaluation Kit Class 2, Bluetooth 2.0+ EDR compatible WT12 module Unregulated power supply input form 5V to 9V RS-232 serial interface USB interface SPI for upgrading the firmware and parameters Reset and DSR buttons 2.5mm audio jacks for speaker and microphone 16 pin I/O interface