Discounted Products

The Loctite 222 is a low-strength thread locker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Ideal for low-strength thread locking of adjusting screws, countersunk head screws and set screws Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses Permits disassembly with hand tools Especially suited to small thread sizes P1 NSF Reg. No.: 123002

Zelio SSRHP Solid State Relay Heatsinks Schneider Electric Zelio solid state relays provide a complete, compact and innovative solution for a wide variety of applications with interfacing control and load switching. The SSRHP series heatsinks come in either panel mount of DIN Rail mount styles that allow mounting of SSP series solid state relays. Heatsinks

FAN 36X28MM 12VDC VANE TACH

INCLINOMETER 2-AXIS 25DEG MOD

Union Y KQ2U The KQ2U union Y fittings from SMC are quick and easy to install into your pneumatic fittings. These KQ2U union Y's are also more compact in design which means that these connectors can be used within a confined space. Union Y fittings are to used to connect tubing in the same direction. The new KQ2 range of products are lighter than previous models and have the advantage of improved insertion and removal forces. Can be used under a wide range of pressures from a low vacuum to 1MPa Low force required for fitting and removal Compact dimensions for use within smaller spaces Tube-to-Tube Fittings & Plugs Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance. Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

SIBA HBC Ceramic Cartridge Fuse Type gR SIBA cylindrical ultra-rapid fuses are available in six different sizes. They can be fitted with or without a built-in striker pin for fuse blown indication or operation of microswitches. High interrupting rating up to 300 kA Voltage rating AC 250 V to AC 1000 V Protection of Power Semiconductors according to IEC 60269-1 and -4 Available with integrated striker pin Classes according to IEC 60269-4 and DIN VDE 0636-40 Fuse-holder / fuse-clips and accessories are available Standards IEC 60269-4; DIN VDE 0636 Teil 40 and UL248-13 Approvals IEC 60269 - 4; DIN VDE 0636 Teil 40; UL 248 - 13

CONN TERM BLK FEED THRU 12-26AWG

The Roline power cable with safety plug 90° angulate and IEC 320-C13 connector. It has two plugs one is schuko plug and another is C5 plug. Connector 1 is male connector and connector 2 is female connector. Pieces per packing unit 20 Length 1.8 m

Compact High Performance Fan Heaters - CR/CS Series The CR/CS series of compact high performance fan heaters prevent formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic enclosure provides double insulation and acts as protection against contact. Compact design Double insulated DIN Rail Mount Enclosure Heaters Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.

H07RN-F Cable A harmonised cable with a multitude of uses - excludes some applications. Core colours are Green/Yellow, Brown, Black and Grey. Features and Benefits • VDE0282 • CPE jacket • Rated Temperature: 60°C Applications • Household appliances • Tools • Lighting Standards VDE0282

RS Pro Thermoplastic Free Swinging Hinges

Energy Saving Eco Tubes Direct retro-fit to replace standard T8 fluorescent lamps Works with both magnetic and high frequency ballasts Latest highly efficient phosphors and filling gas produce comparable light outputs Saves in excess of 10% of the running costs Based on 20,000 hours ruin time (HF ballast) the 5ft tube will save 140kWh of electricity, and the 4ft tube saves 80kWh Triphosphor coating gives good colour rendering Fluorescent Triphosphor Triphosphor tubes have longer life, a lower mercury content, better colour rendering and higher lumen maintenance than their Halophosphate counterparts. The tubes are available in a variety of colour temperatures from 3000K (warm white) to 6000K (daylight) Extended life expectancy which can be increased by upto 20,000 hours with the use of high frequency luminaires Shatter resistant versions available which retain the fragments in the event of a breakage Option of triphosphor tubes with internal reflectors, which reduce waste light and increase light output by up to 75% 16mm (T5) tubes provide a compact alternative to T8 tubes, offering peak performance at 35°C and typically provide 5% more efficiency in most ceiling applications when compared to equivalent T8 tubes Note Nominal tube diameter - T5=16mm, T8=26mm, T9=29mm, T12=38mm