Drywell Calibrators

RS PRO BX-150 Dry Well Calibrator Features and Benefits: Applications: Why is the calibration of a thermometer or temperature measurement instruments important? Why RS PRO? Note:

Fluke 725 & 9100S Drywell Temperature Calibrator Kit Drywell Calibration Kits comprising the Fluke 725 process calibrator and 9100S drywell heat source 725 features Two separate channels; measure, source and view process signals simultaneously Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters Source mA with simultaneous pressure measurement to conduct valve and I/P tests Perform fast linearity tests with auto step and auto ramp features Power transmitters during test using 24 V loop supply and simultaneous mA measurement Store frequently-used test setups for later use 9100S features Contact temperature calibration over a range of –10 °C to 375 °C A stable and uniform heat source Fast to change temperature to set point with short stabilization times Accuracy to 0.25°C and stability to 0.07°C Multiple sized sensor holes to accept a wide range of temperature sensor diameters Technical specification 725 Function Measure Sourcing dc voltage 0-30V 100mV, 10V dc current 0-20mA 0-20mA Frequency 1 count/min to 10kHz, 1-10Hz 2-10,00 count/min, 1-110Hz Thermocouples J, K, T, E, R, S, B, L, U, N RTDs Ni120 (672), Pt100(385), Pt100 (3926), Pt100 (3916), Pt200 (385), Pt500 (385), Pt1000 (385) Pressure Supported via external pressure modules Operating Temperature -40 to +55°C Power supply 4 x AA alkaline batteries (supplied). Life 25hrs (approx) Technical specification 9100S Range 35°C to 375°C Accuracy to ±0.25°C Stability to ±0.07°C Well to Well Uniformity ±0.2°C Well Depth 102mm (1.6mm hole is 89mm deep) Sensor hole diameters 1 x 1/4in (6.4mm), 2 x 3/16in (4.8mm), 1 x 5/32in (4mm), 1 x 1/8in (3.2mm), 1 x 1/16in (1.6mm) Supplied with 725 process calibrato...

Fluke 9100S Hand Held Temperature Drywell A drywell heat source offering a combination of extreme portability and good performance to meet the requirements associated with high speed, high volume industrial calibrations in a shop floor environment. Use the instruments independently or together to make fast zero and span calibrations of temperature sensors. Drywell for checking RTDs, thermocouples, and small bimetal thermometers in the field Fast and easy calibrations of temperature sensors Temperature range 35°C to 375°C, expandable to –10 °C to 375 °C when used with a 9102S drywell (see stock no 537-048 ) Direct interface to the Fluke 744 Documenting Process Calibrator Multiple sized sensor holes to accept a wide range of temperature sensor diameters Function 9100S Temperature Range 35°C to 375°C Accuracy ±0.25°C at 50°C; ±0.25°C at 100°C; ±0.5°C at 375°C Stability ±0.07°C at 50°C;±0.1C at 100°C ±0.3°C at 375°C Sensor hole diameters 1 x 1/16"(1.6mm), 1 x 1/8"(3.2mm), 1 x 5/32"(4mm), 2 x 3/16"(4.8mm), 1 x 1/4” (6.4mm) Well to Well Uniformity ±0.2°C Well Depth 102mm (1.6mm hole is 89mm deep) Heating Time ambient to 375°C: 9 minutes Cooling Time 375°C to 100°C: 16 minutes Dimensions & weight 57 x 125 x 150mm : 1kg Note For 9100S carry case see stock no. 537-044 Supplied with Power Cord, User's Guide with Report of Calibration, RS-232 Cable, 9930 Interface-it Software and User's Guide Fluke 9100 Series Drywell Heat Sources

Fluke 725 & 9100S Drywell Temperature Calibrator Kit Drywell Calibration Kits comprising the Fluke 725 process calibrator and 9100S drywell heat source 725 features Two separate channels; measure, source and view process signals simultaneously Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters Source mA with simultaneous pressure measurement to conduct valve and I/P tests Perform fast linearity tests with auto step and auto ramp features Power transmitters during test using 24 V loop supply and simultaneous mA measurement Store frequently-used test setups for later use 9100S features Contact temperature calibration over a range of –10 °C to 375 °C A stable and uniform heat source Fast to change temperature to set point with short stabilization times Accuracy to 0.25°C and stability to 0.07°C Multiple sized sensor holes to accept a wide range of temperature sensor diameters Technical specification 725 Function Measure Sourcing dc voltage 0-30V 100mV, 10V dc current 0-20mA 0-20mA Frequency 1 count/min to 10kHz, 1-10Hz 2-10,00 count/min, 1-110Hz Thermocouples J, K, T, E, R, S, B, L, U, N RTDs Ni120 (672), Pt100(385), Pt100 (3926), Pt100 (3916), Pt200 (385), Pt500 (385), Pt1000 (385) Pressure Supported via external pressure modules Operating Temperature -40 to +55°C Power supply 4 x AA alkaline batteries (supplied). Life 25hrs (approx) Technical specification 9100S Range 35°C to 375°C Accuracy to ±0.25°C Stability to ±0.07°C Well to Well Uniformity ±0.2°C Well Depth 102mm (1.6mm hole is 89mm deep) Sensor hole diameters 1 x 1/4in (6.4mm), 2 x 3/16in (4.8mm), 1 x 5/32in (4mm), 1 x 1/8in (3.2mm), 1 x 1/16in (1.6mm) Supplied with ...