What are the shipping charges for products like Fibre Optic Test Equipment?

Yes. We keep updating our stock frequently and if a product like Fibre Optic Test Equipment is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Fibre Optic Test Equipment is not in stock then we will let you know.

Where are your products like Fibre Optic Test Equipment manufactured?

Yes. We keep updating our stock frequently and if a product like Fibre Optic Test Equipment is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Fibre Optic Test Equipment?

Yes. We keep updating our stock frequently and if a product like Fibre Optic Test Equipment is not in stock then we will let you know.

How long will it take to receive the order that I placed for Fibre Optic Test Equipment?

Yes. We keep updating our stock frequently and if a product like Fibre Optic Test Equipment is not in stock then we will let you know.

Are your products Fibre Optic Test Equipment in stock?

Yes. We keep updating our stock frequently and if a product like Fibre Optic Test Equipment is not in stock then we will let you know.

Fiber Testers | Fibre Optic Checker | Fiber Optic Cable Testers

New items

180XL, Greenlee

Greenlee 180XL Visual Fault Locator Greenlee 180XL visual fault locator allows the technician to quickly and safely visually locate broken and pinched fibres, faulty connectors and bad splices. The long reach of the 180XL allows the technician to confirm fibre continuity up to distances of 7 km. Allows the technician to locate faults without the use of more expensive equipment Class 2 designation provides safe light levels for the technician 7 km distance Universal 2.5 mm bulkhead Class 2 certification, 0dBm output power Compatible with Single mode and Multimode fibres 2 Hz modulation mode Optional 1.25 mm adapter for LC and MU connections available 1110393 Applications Visual fault locating Confirm fibre continuity

Product Detail

New items

FTK1375 4812151, Fluke Networks

Multimode Fiber Verification Kit with FI-500 FiberInspector Micro The Verification Kits are for contractors and network technicians who install and maintain multimode premises networks. Verify optical loss and power levels at 850 nm and 1300 nm, inspect fiber end-faces, locate cable faults, connector problems and polarity issues. Kit includes FI-500 FiberInspector Micro.Features and Benefits FI-500 PortBright a built-in flashlight illuminates dark areas and dense panelsAutoFocus for stable images in few secondsLarge display to view single-mode and multimode fiber endfacesIncludes 4 UPC tips (LC, SC, 1.25 mm and 2.50 mm)APC tips available FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection.FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time.Supplied with FI-500 with SimpliFiber Pro Multimode PMLS kit (consists of FI-500, SF Pro Power Meter with SC Connector, SF Pro MM Source, Carrying Case, NFA-LC, NFA-ST, VisiFault and two FindFibers

Product Detail

New items

GAC027, Tempo

Product Detail

New items

FTK1300, Fluke Networks

FTK1300 SimpliFiber Pro Verification Kit with FT120 SimpliFiber Pro Multimode Fiber Verification Kit. Full-featured verification kit with FibreViewer Kit Contents SimpliFiber Pro optical power meter 850/1300nm source (SC port) FindFibre Remote ID source FT120 FibreViewer optical microscope VisiFault VFL LC and ST adapters Carrying case

Product Detail

New items

FI-525 4812124, Fluke Networks

FI-525 FiberInspector Micro and Cleaning Kit FI-525 FiberInspector Micro and Cleaning kit. Wet and dry cleaning supplies to remove contamination discovered during fiber inspection with the FI-500. Dirty fibre optic endfaces are the major cause of problems in single-mode and multimode fibre optic systems. The FI-500 FiberInspector™ Micro removes the hassle associated with inspecting fibre end faces, especially in low light and high cable density situations. FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection. FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time. Features and Benefits PortBright™ a built-in flashlight illuminates dark areas and dense panels AutoFocus for stable images in few seconds Large display to view single-mode and multimode fiber endfaces Includes 4 UPC tips (LC, SC, 1.25 mm and 2.50 mm) APC tips available FIber Optic Cleaning Includes cleaning cube with wipes, five cards with sealed cleaning zones, solvent pen and 2.5 mm port cleaning swabs Supplied with FiberInspector™ Micro with probe, display, 4 UPC tips, case, rechargeable batteries, universal power adapter and cleaning kit

Product Detail

New items

FIBR-1-KITPRO-VFPM/RS, Fluke Networks

Fiber OneShot™ PRO Fiber OneShot PRO takes the complexity out of singlemode fiber testing by analysing fiber links and measuring faults up to 15 miles in less than five seconds. First line of dense for troubleshooting: FTTX, Hybrid Fiber Coaxial Cable (HC), Fiber links between central offices, regional or rural access networks. Measure up to 75459 ft (23000 m) of fiber in seconds Locate severe bends, high-loss splices, breaks and dirty connectors in singlemode fiber First response single mode, Fiber troubleshooter One button testing Locates events up to 15 miles (>23 km) Results in less than 5 seconds Save 99 test results Report up to 9 events per fibre link Never needs calibration Locate sources of bit-error rates caused by end-face contamination or poor connection leads No training required No graphs or confusing data to interpret Measure the distance to reflective and loss incidents Measure the reflectance and loss of incidents Maps the connections in single mode fiber plants by showing the number of events on the fiber and the distance to each event Long battery life, 1500 tests (typical) Battery Type: 2 AA alkaline batteries Rugged construction; vibration and drop tested to 1 m Comfortably fits in the hand Visible in dark areas. Backlit display turns off automatically Dimensions: 17.5 cm H, 7.8 cm W, 3.8 cm D Weight: 0.35 kg (including batteries)

Product Detail

New items

50476633, Datacom Technologies

MicrOTDR Optical Fault Locater MicrOTDR™ provides fast, easy, and accurate identification of loss points/faults and length for multimode and singlemode fibre optic cable. Using 1310 nm laser OTDR technology, MicrOTDR takes less than 6 seconds to identify the distance to 6 optical events, plus the cable end. Easy identification of faulty connections, cable breaks, bad splices, breaks, and tight bends in installed links. Initiate all tests with a single key operation. Simple and inexpensive way to check fibre spools for length and flaws. Minimum measurable length is 30 metres (100 feet). Delivers over 13,000 tests from four AA batteries. ST-style output connection. Measure cable length to 20 km. Identify distance to 7 loss points/faults Distance accuracy of +/- 2 metres Singlemode and multimode operation Check fibre reels for length and defects Troubleshoot installed fibre Supplied with 4 x AA batteries

Product Detail

New items

FI100, Greenlee

Greenlee FI-100 Fibre Identifier Kit The FI-100 Optical Fibre Identifier can quickly identify the direction of transmitted fibre and display the relative core power without interrupting the current service. The FI-100 detects modulations of 270 Hz, 1 kHz and 2 kHz with an audible tone and LED indication. There are four adapter heads available: Ø 0.25, Ø 0.9, Ø 2.0 and Ø 3.0. Low Insertion Loss: Non-intrusive low insertion loss prevents alarm conditions Easy Operation: Identifies fibre with tone detect and a clear indication of signal transmission direction Versatile: Supports all common fibres including 250 μm, 900 μm, 2 mm and 3 mm and is able to sense light in bend insensitive fibres Supplied with 1 Optical fibre identifier, set of adapter heads, AAA batteries x 2, instruction manual, soft carry bag and sun shield.

Product Detail

New items

FTK1475 4812160, Fluke Networks

FTK1475 SimpliFiber Pro Verification Kit with FI-500 The Complete Fiber Verification Kit is for contractors and network technicians who install and maintain premises networks with both multimode and singlemode optical fiber. Verify optical loss and power levels at 850 nm, 1300 nm, 1310 nm and 1550 nm, inspect fiber end-faces, locate cable faults, connector problems and polarity issues. Kit includes FI-500 FiberInspector Micro. Features and Benefits FI-500 PortBright™ a built-in flashlight illuminates dark areas and dense panels AutoFocus for stable images in few seconds Large display to view single-mode and multimode fiber endfaces Includes 4 UPC tips (LC, SC, 1.25 mm and 2.50 mm) APC tips available FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection. FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time. Supplied with FI-500 with SimpliFiber Pro Multimode & Singlemode PMLS, VisiFault, 2 FindFibers, Cleaning kit (NFC-KIT-BOX) and 1.25 mm Swabs

Product Detail

New items

4812160, Fluke Networks

FTK1475 SimpliFiber Pro Verification Kit with FI-500 The Complete Fiber Verification Kit is for contractors and network technicians who install and maintain premises networks with both multimode and singlemode optical fiber. Verify optical loss and power levels at 850 nm, 1300 nm, 1310 nm and 1550 nm, inspect fiber end-faces, locate cable faults, connector problems and polarity issues. Kit includes FI-500 FiberInspector Micro. Features and Benefits FI-500 PortBright™ a built-in flashlight illuminates dark areas and dense panels AutoFocus for stable images in few seconds Large display to view single-mode and multimode fiber endfaces Includes 4 UPC tips (LC, SC, 1.25 mm and 2.50 mm) APC tips available FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection. FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time. Supplied with FI-500 with SimpliFiber Pro Multimode & Singlemode PMLS, VisiFault, 2 FindFibers, Cleaning kit (NFC-KIT-BOX) and 1.25 mm Swabs

Product Detail

New items

FQM-SFP-M 4774960, Fluke Networks

Fiber QuickMap™ VFL Fiber QuickMap™ Kit with SimpliFiber Pro featuring all the items in the FOS-100-M plus SimpliFiber Pro-optical power meter and SC adapter. Fiber QuickMap™ fills the gap between a VFL and an OTDR. The model has the simplicity of a VFL and provides distance and power information on high losses, breaks and the end of the fiber. VFLs work well for exposed lengths of fiber near a patch panel by illuminating bad connections and breaks. Features and Benefits One button operation Long range Live fiber detection Numeric distance display Numeric reflective loss (dB) display Fiber Type: Multimode Fiber Size: 50/125 μm and 62.5/125 μm Output Wavelength: 850 nm Range: Up to 1500 m / 4921 feet Quick set-up Find problems quickly, 6 second test time Key information visible on a large display Power loss in db and distance in meters or feet Set loss and reflection limits Change the Index of Refraction (IOR), improves fiber length accuracy Visible in dark areas, backlit display turns off automatically Removable SC adapter is easily cleaned Optional LC, ST and FT interchangeable adapters are available Long battery life, 1500 tests (typical) from 2 AA alkaline batteries Rugged construction; vibration and drop tested to 1 m Applications Measure and locate high-loss splices Measure and locate high loss connections and breaks Locate the end of a fiber Find potential sources of high bit error rates caused by reflectance from dirty or poor connections Detects live optical signals before it begins testing

Product Detail

New items

4812124, Fluke Networks

FI-525 FiberInspector Micro and Cleaning Kit FI-525 FiberInspector Micro and Cleaning kit. Wet and dry cleaning supplies to remove contamination discovered during fiber inspection with the FI-500. Dirty fibre optic endfaces are the major cause of problems in single-mode and multimode fibre optic systems. The FI-500 FiberInspector™ Micro removes the hassle associated with inspecting fibre end faces, especially in low light and high cable density situations. FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection. FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time. Features and Benefits PortBright™ a built-in flashlight illuminates dark areas and dense panels AutoFocus for stable images in few seconds Large display to view single-mode and multimode fiber endfaces Includes 4 UPC tips (LC, SC, 1.25 mm and 2.50 mm) APC tips available FIber Optic Cleaning Includes cleaning cube with wipes, five cards with sealed cleaning zones, solvent pen and 2.5 mm port cleaning swabs Supplied with FiberInspector™ Micro with probe, display, 4 UPC tips, case, rechargeable batteries, universal power adapter and cleaning kit

Product Detail