Leak Detector Spray

The CRC low temp leak finder locates gas leaks in low temperature applications. For regular testing of pressurized gas equipment, pipes, and connections is vital to minimise the risk of leaks developing, undetected. High viscosity foam Inexpensive to use and not subjected to equipment break down Easy and quick

The Rocol FLAWFINDER Non-destructive inspection system is designed to provide a fast reliable method for visual detection of cracks or flaws which would not normally be visible to the naked eye. Ideal for the inspection of welded joints, castings, forgings etc. The FLAWFINDER non-destructive testing kit (also known as PT inspection) includes the cleaner, penetrant and developer spray in a convenient carry pack. FLAWFINDER CLEANER Spray 300ml: Cuts through dirt, grease and grime Zero residue Prepares surface for non destructive testing FLAWFINDER DEVELOPER Spray 400ml: Highly absorbent white film for rapid results Highlights very fine cracks Sharp indication and geometry of defect to the naked eye Suitable for pressure testing & leak detection FLAWFINDER DYE PENETRANT Spray 300ml: Bright red even film Highly sensitive dye Water washable

CRICK Crack Detection System CRICK 110 (RS 823-2602 and 124-6386 ) Detector of micro cracks and faults Fast drying cleaner for the removal of all types of contaminants from the area to be inspected, before application of Crick 120 CRICK 120 (RS 823-2606 and 124-6385 ) Water washable red dye penetrant For the fast, non-destructive testing of welds Detection of surface faults and cracks by liquid penetrant testing CRICK 130 (RS 823-2615 and 124-6384 ) Fast evaporating developer A developer must be applied after the removal of the excess of the red penetrant Crick 120 With this a visual inspection of the surface can be done Applications: Non-destructive inspection of materials, parts, assemblies, equipment, surfaces or structures: - Cracks, lack of fusion and open cavities in welded parts - Cracks and cavities caused by metal fatigue and cutting operations - Check of porosity or leaks in pipes, tanks, boilers, heat exchangers - Discontinuities, laps, folds and cracks in castings, forgings and ceramics

CRICK Crack Detection System CRICK 110 (RS 823-2602 and 124-6386 ) Detector of micro cracks and faults Fast drying cleaner for the removal of all types of contaminants from the area to be inspected, before application of Crick 120 CRICK 120 (RS 823-2606 and 124-6385 ) Water washable red dye penetrant For the fast, non-destructive testing of welds Detection of surface faults and cracks by liquid penetrant testing CRICK 130 (RS 823-2615 and 124-6384 ) Fast evaporating developer A developer must be applied after the removal of the excess of the red penetrant Crick 120 With this a visual inspection of the surface can be done Applications: Non-destructive inspection of materials, parts, assemblies, equipment, surfaces or structures: - Cracks, lack of fusion and open cavities in welded parts - Cracks and cavities caused by metal fatigue and cutting operations - Check of porosity or leaks in pipes, tanks, boilers, heat exchangers - Discontinuities, laps, folds and cracks in castings, forgings and ceramics