Products Found: 1161

Showing Results For: Thermistor ICs

Thermistor ICs

A thermistor is installed in a broad selection of circuitry and printed circuit boards for temperature assessment, also for the current-limiting monitoring system. The resistance alteration of a thermistor is based on the ambient temperature of the component. The conduction model is used to classify thermistors. Thermistors with a positive temperature coefficient (PTC) exhibit more resistance at higher temperatures than thermistors with a negative temperature coefficient (NTC). As a result, the resistance of a PTC thermistor is inversely proportional to temperature.

Types of Thermistor ICs

Depending on the materials used, thermistors are classified into two types:

  • With an NTC thermistor, resistance decreases as the temperature rises, typically due to a rise in conduction electrons raised by thermal excitement from the valence shell. An NTC is typically used as a temperature detector, or in a sequence with a circuit as an inrush voltage confiner.
  • With PTC thermistors, withstand raises as the temperature rises, commonly due to enhancement in thermal lattice excitement, especially those that are not refined and imperfect. PTC thermistors are typically used in series with a circuit board and are employed to secure and resist overcurrent circumstances through resettable fuses.

Typical Applications

  • As an alternative to fuses, as current-limiting devices for circuit protection. A minor degree of resistive heating results from current flowing through the device.
  • Most CRT displays use them as timers in the degaussing coil circuit. The thermistor and degaussing coil both experience current flow when the display unit is first turned on.
  • In the automobile industry, a heater is used to heat the diesel before engine injection in cold climates or to offer additional heat to the cabin when using a diesel engine.
  • In voltage-controlled oscillators for temperature-compensated synthesizers.
  • To provide the heat required to cause the wax to expand in an electrically powered wax motor.

FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Rohs Verified
B57230V2103F260, TDK
Pre Order
Check Stock & Lead Times Packaging Options
50 +
£ 0.052
500 +
£ 0.045
1000 +
£ 0.039
Rohs Verified
NCP15XQ471J03RC, Murata
948 In Stock
Check Stock & Lead Times Packaging Options
25 +
£ 0.060
TE Connectivity
Rohs Verified
GA10K3MBD1, TE Connectivity
6 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 28.00
10 +
£ 26.05
25 +
£ 23.81
Rohs Verified
NTCLE100E3272JB0, Vishay
Pre Order
Check Stock & Lead Times Packaging Options
500 +
£ 0.26
1000 +
£ 0.24
Amphenol Advanced Sensors
Rohs Verified
NHQM103B375T5, Amphenol Advanced Sensors
5944 In Stock
Check Stock & Lead Times Packaging Options
3000 +
£ 0.93
Amphenol Advanced Sensors
Rohs Verified
YS4020, Amphenol Advanced Sensors
Pre Order
Check Stock & Lead Times Packaging Options
2500 +
£ 2.10
5000 +
£ 2.06
TE Connectivity
Rohs Verified
GA2.2K3A1IA, TE Connectivity
498 In Stock
Check Stock & Lead Times Packaging Options
500 +
£ 3.67
1000 +
£ 3.43
Rohs Verified
PRF21BC471QB5RA, Murata
3973 In Stock
Check Stock & Lead Times Packaging Options
5 +
£ 0.27
TE Connectivity
Rohs Verified
NTC0805J2K0, TE Connectivity
2398 In Stock
Check Stock & Lead Times Packaging Options
100 +
£ 0.23
Rohs Verified
B57153S0150M000, TDK
2998 In Stock
Check Stock & Lead Times Packaging Options
1000 +
£ 0.21
Rohs Verified
B57464S0209M000, TDK
198 In Stock
Check Stock & Lead Times Packaging Options
200 +
£ 2.52
Rohs Verified
B57364S0409M000, TDK
248 In Stock
Check Stock & Lead Times Packaging Options
250 +
£ 1.07
NTCLE100E3332JB0, Vishay
6998 In Stock
Check Stock & Lead Times Packaging Options
500 +
£ 0.25
1000 +
£ 0.24
2500 +
£ 0.22
Rohs Verified
NCU15WF104F60RC, Murata
9998 In Stock
Check Stock & Lead Times Packaging Options
10000 +
£ 0.021
NTCLE100E3333JB0, Vishay
3998 In Stock
Check Stock & Lead Times Packaging Options
500 +
£ 0.19
NTCLE413E2103F102L, Vishay
4798 In Stock
Check Stock & Lead Times Packaging Options
100 +
£ 0.73
200 +
£ 0.72
500 +
£ 0.66
PTS080501B100RP100, Vishay
998 In Stock
Check Stock & Lead Times Packaging Options
1000 +
£ 0.96
TE Connectivity
Rohs Verified
GAG10K3976A1, TE Connectivity
Pre Order
Check Stock & Lead Times Packaging Options
500 +
£ 17.64
TE Connectivity
Rohs Verified
NTC0805J10K, TE Connectivity
4998 In Stock
Check Stock & Lead Times Packaging Options
5000 +
£ 0.41
Rohs Verified
PRF15BA102RB6RC, Murata
2848 In Stock
Check Stock & Lead Times Packaging Options
5 +
£ 0.10
Rohs Verified
PRF18BC471RB5RB, Murata
Pre Order
Check Stock & Lead Times Packaging Options
5 +
£ 0.15
50 +
£ 0.14
100 +
£ 0.12
Rohs Verified
B57863S0302F040, TDK
12 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 1.84
10 +
£ 1.73
25 +
£ 1.69
Rohs Verified
B57237S0100M000, TDK
90 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 0.70
25 +
£ 0.65
50 +
£ 0.61
NTCLE213E3103GLB0, Vishay
558 In Stock
Check Stock & Lead Times Packaging Options
20 +
£ 0.55
100 +
£ 0.51
200 +
£ 0.48
NTCALUG02A103F, Vishay
498 In Stock
Check Stock & Lead Times Packaging Options
500 +
£ 0.94
1000 +
£ 0.90
Showing
1 -

New Items
New items
B57560G1103F000, EPCOS

B57560G1103F000, EPCOS

Epcos Glass-Encapsulated Sensor Heat resistive and highly stable For temperature measurement up to 300 °C Small dimensions Leads: nickel plated wires
New items
NTCLE100E3221JB0, Vishay

NTCLE100E3221JB0, Vishay

Vishay NTC Thermistors 0.5W 640 series Negative Temperature Coefficient Thermistors (NTC) are semiconductor resistors whose resistance, at zero dissipation, decreases when the temperature varies either by the joule effect, with the ambient temperature or through a combination of the two. Measurement and checking of the temperature (thermometer, thermostat, sensor), current draw limiters and temperature compensation circuits for transistor circuits are some of the main applications for thermistors. Rated dissipation: 0.5 W Operating temperature: –40 °C → +150 °C
New items
B57045K0682K000, EPCOS

B57045K0682K000, EPCOS

Epcos K45 Series NTC Probe Assemblies Applications in temperature compensation, measurement and for chassis mounting Aluminium housing, electrically insulated terminal wires made from tinned copper
New items
NTCLE100E3473JB0, Vishay

NTCLE100E3473JB0, Vishay

Vishay NTC Thermistors 0.5W 640 series Negative Temperature Coefficient Thermistors (NTC) are semiconductor resistors whose resistance, at zero dissipation, decreases when the temperature varies either by the joule effect, with the ambient temperature or through a combination of the two. Measurement and checking of the temperature (thermometer, thermostat, sensor), current draw limiters and temperature compensation circuits for transistor circuits are some of the main applications for thermistors. Rated dissipation: 0.5 W Operating temperature: –40 °C → +150 °C
New items
B57471V2103J062, EPCOS

B57471V2103J062, EPCOS

0402, 0603 ,0805 B57 Series SMD NTC Thermistors This Series of EPCOS SMD NTC thermistors can be used for temperature measurement and compensation. The 0402 and 0603 series are the automotive series and the 0805 is the standard series. Features & Benefits: Multilayer SMD NTC with inner electrodes Nickel barrier termination Excellent long-term aging stability in a high-temperature environment Superior resistance stability during soldering (change Approvals IEC 60068-1
New items
B57703M0103A017, Epcos

B57703M0103A017, Epcos

NTC sensor elements are the functional basis for all kinds of NTC temperature sensors in all applications. TDK offers epoxy resin and glass-encapsulated elements for temperature ranges of up to 160°C and 300°C, respectively, as well as unleaded NTC chip thermistors for temperature measurement, e.g. in IGBT modules. These sensor elements, which are available with and without insulated leads, feature fast response times and very precise measurements. Cabinet and evaporator in refrigerators and deep freezers Thermistor in molded plastic case with cable outlet Highly resistant to water/moisture PVC-insulated connecting cable (white) Conductor cross section: 2 ´ 0.34 mm2 Construction based on DIN EN 60 730 -1/VDE protection class 2 UL approval (E252167)
New items
B57164K0682J000, Epcos

B57164K0682J000, Epcos

NTC sensor elements are the functional basis for all kinds of NTC temperature sensors in all applications. TDK offers epoxy resin and glass-encapsulated elements for temperature ranges of up to 160°C and 300°C, respectively, as well as unleaded NTC chip thermistors for temperature measurement, e.g. in IGBT modules. These sensor elements, which are available with and without insulated leads, feature fast response times and very precise measurements. Temperature measurement and compensation Wide resistance range Cost-effective Lacquer-coated thermistor disk Tinned copper leads Lead spacing 5 mm Marked with resistance and tolerance
New items
NB12K00103KBB, AVX

NB12K00103KBB, AVX

0805,1206 NB12 - NB20 Series High quality chip thermistors Nickel barrier metallization giving outstanding solderability qualities Applications include temperature compensation and temperature control of printed circuits
New items
RS_151-221, RS PRO

RS_151-221, RS PRO

RS Pro R-T Curve Matched Brought to you under the trusted RS Brand, these R-T curve (Resistance-Temperature) matched thermistors are small, high quality, epoxy encapsulated, precision devices. These epoxy coated interchangeable chip thermistors offer true interchangeability over wide temperature ranges, permitting the circuit designer to standardise on circuitry. This eliminates the need to individually adjust circuits and allows the thermistors to be easily replaced without the need for re-calibration.
New items
B57238S0709M000, EPCOS

B57238S0709M000, EPCOS

NTC thermistors are specially developed to limit the current at turn-on by their relatively high resistance when they are cold. When the NTC thermistor heats up as a result of the current load its resistance decreases by a factor of 10 to 50, and the power it draws reduces accordingly. NTC thermistors are able to handle higher inrush currents than fixed resistors with the same power consumption. Leaded and coated NTC thermistors Tinned copper wire, kinked Component marking includes the manufacturer'slogo, resistance value and date code Highly stable electrical characteristics Applications Inrush current limiting, e.g. in switch-mode power supplies, soft-start motors
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Thermistor ICs and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Thermistor ICs or any other product.
This depends on the Thermistor ICs individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Thermistor ICs and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Thermistor ICs.
Yes. We keep updating our stock frequently and if a product like Thermistor ICs is not in stock then we will let you know.