What are the shipping charges for products like Mould Release Agents?

Yes. We keep updating our stock frequently and if a product like Mould Release Agents is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Mould Release Agents is not in stock then we will let you know.

Where are your products like Mould Release Agents manufactured?

Yes. We keep updating our stock frequently and if a product like Mould Release Agents is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Mould Release Agents?

Yes. We keep updating our stock frequently and if a product like Mould Release Agents is not in stock then we will let you know.

How long will it take to receive the order that I placed for Mould Release Agents?

Yes. We keep updating our stock frequently and if a product like Mould Release Agents is not in stock then we will let you know.

Are your products Mould Release Agents in stock?

Yes. We keep updating our stock frequently and if a product like Mould Release Agents is not in stock then we will let you know.

Mould Release Agents | Greases Oil Lubricants

New items

32838, CRC

The CRC clear mould protect used for short term mould tool protection. It repels humidity on metal surfaces and chemically inert for alloy and non ferrous metals. High covering power

Product Detail

New items

Highly effective and powerful solvent blend developed for use on heavily soiled moulds and dies to remove a variety of moulding deposits. Features Foaming action which clings to the mould surface and facilitates a good contact with the contamination. Removes: plastics, rubbers and resin residues, even when carbonized. Thixotropic formulation for maximum efficiency, even on vertical surfaces. Leaves a clean and dry surface after application. Application Thorough cleaning of mould surfaces. Eliminate remnants of polymers gaskets or gaz blowouts on transforming moulds. Directions Apply think layer from 25 cm distance. Allow to act on the surface for 10 to 15 minutes. Take of the residue with a brush, plastic spatula or a water jet. Clean the mould according to the standard procedure. Protect the surfaces against corrosion when stored.

Product Detail

New items

31541-AC, Ambersil

Formula 10, Non-Silicone Release Agent Highly effective dry, non-silicone mould release agent for thermosetting plastics Excellent release properties on polyurethane, epoxy resins and polyesters

Product Detail

New items

31971-AB, Ambersil

NO-SIL Release Agent A heavy duty, wet, non-silicone mould release agent, formulated to provide excellent release characteristics on a wide range of thermoplastics and rubbers. Heavy duty, non-silicone mould release agent Excellent release characteristics on a wide range of thermoplastics and rubber parts

Product Detail

New items

RST250, Electrolube

RST - Resin Stop Resin Stop has been formulated using fluoropolymer technology to provide a film that once applied to the substrate, prevents most epoxy and polyurethane resins adhering.RST is ideally suited for coating machinery, jigs, moulds and many other substrates likely to come into contact with resin such as, aluminium, stainless steel, glass and plastics. once the resin has fully cured it can then simply be peeled off. Provides a non-stick coating Silicone free - non-migrating Dry film – eliminates unwanted transfer Multiple release cycles Reduces the frequency to clean mould tools etc Touch dry 5 minutes Operating Temperature Range: -55°C to +130°C Note This product contains a flammable solvent, do not spray Resin Stop directly onto live equipment and ensure all the solvent has evaporated before turning the power back on.

Product Detail

New items

32353-AB, Ambersil

HD-SIL Release Agent A general purpose, heavy duty silicone lubricant, which exhibits excellent anti-stick and slip properties. Particularly effective in mould release and injection moulding operations. Heavy duty silicone release agent Ideal for use where a clean, colourless lubricant is required Wet, silicone film delivers effective release Suitable for use in foam conversion, chutes & conveyors, paper & textile

Product Detail

New items

32956, CRC

A high purity silicone release agent for moulding of food contact plastic packaging. NSF registered M1 Maximum operational temperature: +200°C Provides good brilliance at transparent plastics Excellent slip for uncomplicated release of light weight mouldings

Product Detail

New items

32840, CRC

A powerful solvent blend formulated to remove a wide range of common soiling from moulds, tools and dies. Quickly and easily removes oils, grease, old protective films Perfect for removing old release agents Leaves a clean, dry and residue free surface

Product Detail

New items

32454-AB, Ambersil

Ambersil Silicone Mould Release FG When you are working within the food packaging industry and you need a proven multi-purpose silicone mould release agent the Silicone Release FG is ideal for your use. The silicone release is an extremely effective general purpose release agent for use in all thermoplastics and many other moulded rubber types that are used within the food processing industry. FEATURE LIST: Appearance – colourless, clear liquid Odour – hydrocarbon Solubility – Soluble in solvents and is insoluble in water Flammability – Classified as extremely flammable under current EC Regulations SG@ 25°C – 0.723 Pressure @ 25°C – 3.5 Bar Discharge rate – 0.8 g/sec Temperature range – operational up to 200°C NSF registered – M1 (No. 149686) Approvals – NSF M1 149686 APPLICATIONS: Provides the user with a medium duty cover for the release of plastic and rubber parts in: Injection moulding Compression moulding Vacuum forming Variety of other moulding and forming processes. This will not build up within the mould plus improves the surface finish helping to increase production. STORAGE: The silicone release FG can be stored at normal ambient temperatures. Aerosols should always be stored at temperatures below 50 °C SHELF LIFE: With the correct storage the product has a shelf life of not less than 72 months Approvals NSF M1 149686

Product Detail

New items

31550-AB, Ambersil

Mould Cleaner Powerful solvent blend formulated to remove a wide range of soiling from mould tools, extrusion dies and other metal surfaces. Quickly and easily removes oil, grease, old protective films, silicone and non-silicone based mould release agents Contolled evaporation permits use on hot production tooling without excessive solvent loss Leaves surfaces clean and dry

Product Detail

New items

32446-AB, Ambersil

Ambersil Non Silicone Release FG When you are working within the food processing industry and you need a proven multi-purpose non- silicone mould release agent the Non- Silicone Release FG is ideal for your use. The non-silicone release is an extremely effective release agent for use in the majority of polymers that are used within the food processing industry. FEATURE LIST: Appearance – colourless, clear liquid Odour – hydrocarbon Solubility – Soluble in solvents and is insoluble in water Flammability – Classified as extremely flammable under current EC Regulations SG@ 25°C – 0.75 Pressure @ 25°C – 3 Bar Discharge rate – 0.9 g/sec Temperature range – operational up to 200°C Approval – NSF M1 & H1 registered APPLICATIONS: Provides the user with a wet cover for the release of polymers in: Injection moulding Vacuum forming Variety of other moulding and forming processes. This will not build up within the mould plus improves the surface finish helping to increase production and reduce rejects. STORAGE: The silicone release FG can be stored at normal ambient temperatures. Aerosols should always be stored at temperatures below 50 °C. SHELF LIFE: With the correct storage the product has a shelf life of not less than 72 months.

Product Detail

New items

31547-AB, Ambersil

Clear Mould Protective A transparent, non-silicone corrosion inhibitor for injection mould tools and extrusion dies. Repels and displaces moisture, leaving a durable, clear protective film Recommended for use with clear or white polymers. Will not stain or mark the moulding Dry film will not penetrate or creep into the mould tool Easily moulded-off when production recommences Protective film allows handling, and will resist acid finger marks

Product Detail