Cable Detectors & Fuse Finders

Fluke 2042 Cable Tracer The Fluke 2042 is a versatile professional general purpose cable locator ideal for tracing cables in walls and floors. With the Fluke 2042 interruptions and short-circuits can be found in cables, perfect for applications such as underfloor heating systems. Metal pipework can also be traced. The kit consists of a transmitter and receiver. The transmitter is used to apply a signal to the desired circuit under investigation. The separate receiver is then used to trace the signal in the circuit and incorporates a torch to assist in dimly lit locations. Features & Benefits • Traces cables & metal pipes in walls and floors • Locates fuses and assignment to circuits • Locates concealed sockets and distribution boxes • Locates interruptions and short-circuits in unshielded electrical cables • Tracing depth up to 2.5m – dependant on material (concrete etc.) • Mains voltage location up to 0.4m • Transmitter LCD display for transmission level, transmitting code and external voltage • Receiver with LCD display of received signal level, code and live voltage indication • Automatic or manual adjustment of receiving signal sensitivity • Torch lamp in receiver for dark environments Kit Contents • 2042 transmitter • 2042 receiver • TP74 lantern tip test probe set • AC285 alligator clip set • Soft carry case • Hard case • User Guide

Fluke 2042T Cable Locator Transmitter The Fluke 2042T is a professional general purpose cable transmitter. The cable locator transmitter is ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits and locating interruptions and short-circuits in cables and electrical floor heating systems. The Fluke 2042T can also be used for tracing metallic water and heating pipes. The Fluke 2042T can be used with the Fluke 2042 Cable Tracer as an additional transmitter for extension or to distinguish between several signals Output signal: 125 kHz Voltage Range: 12 to 400 V Frequency Range: 0 to 60 Hz Display: LCD with display of functions External Voltge Detection: max. 400 V AC/DC Over Voltage Category: CAT III/300 V Pollution Degree: 2 Dimensions: 190 x 85 x 50 mm Supplied with 4 test leads, 6 x 1.5v batteries, 2 crocodile clamps, 2 test probes, user manual

Beha-Amprobe AT-7000-EUR Advanced Wire Tracer Kit AT-7030-EUR Beha-Amprobe AT-7000-EUR advanced wire tracer makes tracing energised wires easier and more accurate for any user, from novice to expert. The Receiver has a patented Smart Sensor, with innovative antenna design and advanced signal processor. It feeds back the location and orientation of energised wires in walls, floors and ceilings to the large, dynamic, colour TFT LCD screen. The powerful Transmitter uses two optimal frequencies for energised and de-energised wire and breaker tracing, delivering consistently accurate results. The Scan and Locate feature identifies the one correct breaker or fuse, eliminating the confusion from multiple false positive readings common in older-technology tracing tools. The AT-7000-EUR traces to 5 cm (2 in) accuracy, even on circuits protected by RCDs. Kit for tracing wires in walls, ceilings, floors and corners Locates breakers and fuses Pinpoints shorts and opens High resolution 8.89 cm (3.5 in) TFT LCD colour display 'High' power mode for normal circuits 'Low' power mode for precision tracing in difficult areas 'Clamp' power mode provides a boosted signal using signal clamp Two automatically selected frequency modes for optimal tracing on energised and de-energised circuits Signal booster rechargeable battery pack (BR-7000-T) increases transmitter signal strength Clamp-on attachment (SC-7000-EUR) for inducing signal into wires without access to bare conductors Embedded help screens make set-up easy and error-free Carrying case dimensions 40.6 x 33 x 17.8 cm (16 x 13 x 7 in) Kit weight 4.67 kg (10.30 lb) Supplied with Receiver (AT-7000-RE), transmitter (AT-7000-TE), signal clamp (SC-7000-EUR), hanger (HS-1), booster battery (BR-7000-T), carrying case (CC-7000-EUR), test leads (TL-7000-EUR) including red test lead 1.9 m (6.4 ft), green test lead 7.7 m (25...

MADE JUPITER+ MV/LV Cable Tracer JUPITER+ is a system for identifying cables in a trench, gutter or cable shelf. Each of the functions is carried out on unpowered MV & LV cables (customer loads online). The signals and the physical principles used are common for each function. JUPITER+ consists of a transmitter and a receiver, both can be used offline and grounded on electronic networks. The receiver allows cable pre-identifying, continuity checking and phase identifying in open circuit or short circuit modes. Simplified ergonomics: continuity and phases identifying in open circuit mode are realised in a single handling Single sensor for pre-identifying whatever the cable type Enhanced performances on impregnated paper cables identifying Storage of accessories and suitcase volume improved Transmitter battery can be charged when suitcase is closed Embedded self-diagnosis functions