Power Distribution Accessories

Multi-Contact POAG Potential Equalisation Leads with Right Angle Connector Sockets Multi-Contact POAG potential equalisation leads are highly flexible green/yellow coloured wire equipotential leads complete with a spring loaded right angle moulded POAG connector socket on each end, available in differing lengths and cable cross sections to suit many applications.These POAG equalisation potential leads are designed to equalise potentials between different metal parts that can be touched simultaneously or to reduce differences of potential that can occur during use between the bodies of medical electrical devices and conductive parts of other objects, designed for use in hospitals and other similiar facilities, conforming to DIN 42801 Part 2 standards. Screw connection is simply effected by means of a standard 2mm Allen key (no special tool needed) Nickel-plated socket and gold-plated Multilam for dependable, durable contact Designed in accordance with DIN 42801 part 2 POAG Potential Equilisation Leads Stock No Lead Cross Section Cable Length Socket Length Socket Internal Diameter Outside Diameter Overall socket Dimensions 7865328 4mm 2 1m 17mm 6mm 10mm 37 x 34.5mm 7865337 6mm 2 1m 17mm 6mm 10mm 37 x 34.5mm 7865330 4mm 2 3m 17mm 6mm 10mm 37 x 34.5mm 7865334 6mm 2 3m 17mm 6mm 10mm 37 x 34.5mm Standards DIN 42801 Part 2 Multi-Contact POAG Potential Equalisation Connectors and Leads Multi-Contact POAG self assembly connectors and potential equalisation flexible leads are designed for use In hospitals and medical installations where patients and staff are subjected to dangerous, uncontrollable compensating currents flowing between equipment and touchable conducting parts of different voltage potentials, the answer to this problem is the installation of a seamless equipotent...

Multi-Contact POAG Potential Equalisation Leads with Right Angle Connector Sockets Multi-Contact POAG potential equalisation leads are highly flexible green/yellow coloured wire equipotential leads complete with a spring loaded right angle moulded POAG connector socket on each end, available in differing lengths and cable cross sections to suit many applications.These POAG equalisation potential leads are designed to equalise potentials between different metal parts that can be touched simultaneously or to reduce differences of potential that can occur during use between the bodies of medical electrical devices and conductive parts of other objects, designed for use in hospitals and other similiar facilities, conforming to DIN 42801 Part 2 standards. Screw connection is simply effected by means of a standard 2mm Allen key (no special tool needed) Nickel-plated socket and gold-plated Multilam for dependable, durable contact Designed in accordance with DIN 42801 part 2 POAG Potential Equilisation Leads Stock No Lead Cross Section Cable Length Socket Length Socket Internal Diameter Outside Diameter Overall socket Dimensions 7865328 4mm 2 1m 17mm 6mm 10mm 37 x 34.5mm 7865337 6mm 2 1m 17mm 6mm 10mm 37 x 34.5mm 7865330 4mm 2 3m 17mm 6mm 10mm 37 x 34.5mm 7865334 6mm 2 3m 17mm 6mm 10mm 37 x 34.5mm Standards DIN 42801 Part 2 Multi-Contact POAG Potential Equalisation Connectors and Leads Multi-Contact POAG self assembly connectors and potential equalisation flexible leads are designed for use In hospitals and medical installations where patients and staff are subjected to dangerous, uncontrollable compensating currents flowing between equipment and touchable conducting parts of different voltage potentials, the answer to this problem is the installation of a seamless equipotential grounding system. Multi-Contact POAG connectors and potential equalisation leads are ideal for stationary site installations and medical instrum...

Multi-Contact POAG Right Angle Connector Sockets for Potential Equalisation Leads Multi-Contact POAG right angle sockets are self assembly connectors for the creation of potential equalisation leads. These POAG socket connectors are made from hand drawn copper alloy which has been gold plated and are available in 4mm 2 and 6mm 2 cable cross section versions. The POAG connector assembly has a threaded Allen key screw cable retainer (a 2mm Allen key is the only tooling required for complete cable assembly), the connector itself clips together. These potential equalisation connectors, once assembled as equipotential leads are designed to equalise potentials between different metal parts that can be touched simultaneously or to reduce differences of potential that can occur during use between the bodies of medical electrical devices and conductive parts of other objects, designed for use in hospitals and other similiar facilities, conforming to DIN 42801 Part 2 standards. Screw connection is simply effected by means of a standard 2mm Allen key (no special tool needed) Nickel-plated socket and gold-plated Multilam for dependable, durable contact Designed in accordance with DIN 42801 part 2 POAG Self Assembly Connectors Stock No. Acceptable Cable Cross Section Outside Diameter Socket Length Socket Internal Diameter Overall Connector Dimensions 7865321 4mm 2 10mm 17mm 6.1mm 38.9 x 33.8mm 7865324 6mm 2 10mm 17mm 6.1mm 38.9 x 33.8mm Standards DIN 42801 Part 2 Multi-Contact POAG Potential Equalisation Connectors and Leads Multi-Contact POAG self assembly connectors and potential equalisation flexible leads are designed for use In hospitals and medical installations where patients and staff are subjected to dangerous, uncontrollable compensating currents flowing between equipment and touchable conducting parts of different volt...

Multi-Contact POAG Right Angle Connector Sockets for Potential Equalisation Leads Multi-Contact POAG right angle sockets are self assembly connectors for the creation of potential equalisation leads. These POAG socket connectors are made from hand drawn copper alloy which has been gold plated and are available in 4mm 2 and 6mm 2 cable cross section versions. The POAG connector assembly has a threaded Allen key screw cable retainer (a 2mm Allen key is the only tooling required for complete cable assembly), the connector itself clips together. These potential equalisation connectors, once assembled as equipotential leads are designed to equalise potentials between different metal parts that can be touched simultaneously or to reduce differences of potential that can occur during use between the bodies of medical electrical devices and conductive parts of other objects, designed for use in hospitals and other similiar facilities, conforming to DIN 42801 Part 2 standards. Screw connection is simply effected by means of a standard 2mm Allen key (no special tool needed) Nickel-plated socket and gold-plated Multilam for dependable, durable contact Designed in accordance with DIN 42801 part 2 POAG Self Assembly Connectors Stock No. Acceptable Cable Cross Section Outside Diameter Socket Length Socket Internal Diameter Overall Connector Dimensions 7865321 4mm 2 10mm 17mm 6.1mm 38.9 x 33.8mm 7865324 6mm 2 10mm 17mm 6.1mm 38.9 x 33.8mm Standards DIN 42801 Part 2 Multi-Contact POAG Potential Equalisation Connectors and Leads Multi-Contact POAG self assembly connectors and potential equalisation flexible leads are designed for use In hospitals and medical installations where patients and staff are subjected to dangerous, uncontrollable compensating currents flowing between equipment and touchable co...

Multi-Contact POAG Potential Equalisation Leads with Right Angle Connector Sockets Multi-Contact POAG potential equalisation leads are highly flexible green/yellow coloured wire equipotential leads complete with a spring loaded right angle moulded POAG connector socket on each end, available in differing lengths and cable cross sections to suit many applications.These POAG equalisation potential leads are designed to equalise potentials between different metal parts that can be touched simultaneously or to reduce differences of potential that can occur during use between the bodies of medical electrical devices and conductive parts of other objects, designed for use in hospitals and other similiar facilities, conforming to DIN 42801 Part 2 standards. Screw connection is simply effected by means of a standard 2mm Allen key (no special tool needed) Nickel-plated socket and gold-plated Multilam for dependable, durable contact Designed in accordance with DIN 42801 part 2 POAG Potential Equilisation Leads Stock No Lead Cross Section Cable Length Socket Length Socket Internal Diameter Outside Diameter Overall socket Dimensions 7865328 4mm 2 1m 17mm 6mm 10mm 37 x 34.5mm 7865337 6mm 2 1m 17mm 6mm 10mm 37 x 34.5mm 7865330 4mm 2 3m 17mm 6mm 10mm 37 x 34.5mm 7865334 6mm 2 3m 17mm 6mm 10mm 37 x 34.5mm Standards DIN 42801 Part 2 Multi-Contact POAG Potential Equalisation Connectors and Leads Multi-Contact POAG self assembly connectors and potential equalisation flexible leads are designed for use In hospitals and medical installations where patients and staff are subjected to dangerous, uncontrollable compensating currents flowing between equipment and touchable conducting parts of different voltage potentials, the answer to this problem is the installation of a seamless equipotential grounding system. Multi-Cont...

Multi-Contact POAG Potential Equalisation Leads with Right Angle Connector Sockets Multi-Contact POAG potential equalisation leads are highly flexible green/yellow coloured wire equipotential leads complete with a spring loaded right angle moulded POAG connector socket on each end, available in differing lengths and cable cross sections to suit many applications.These POAG equalisation potential leads are designed to equalise potentials between different metal parts that can be touched simultaneously or to reduce differences of potential that can occur during use between the bodies of medical electrical devices and conductive parts of other objects, designed for use in hospitals and other similiar facilities, conforming to DIN 42801 Part 2 standards. Screw connection is simply effected by means of a standard 2mm Allen key (no special tool needed) Nickel-plated socket and gold-plated Multilam for dependable, durable contact Designed in accordance with DIN 42801 part 2 POAG Potential Equilisation Leads Stock No Lead Cross Section Cable Length Socket Length Socket Internal Diameter Outside Diameter Overall socket Dimensions 7865328 4mm 2 1m 17mm 6mm 10mm 37 x 34.5mm 7865337 6mm 2 1m 17mm 6mm 10mm 37 x 34.5mm 7865330 4mm 2 3m 17mm 6mm 10mm 37 x 34.5mm 7865334 6mm 2 3m 17mm 6mm 10mm 37 x 34.5mm Standards DIN 42801 Part 2 Multi-Contact POAG Potential Equalisation Connectors and Leads Multi-Contact POAG self assembly connectors and potential equalisation flexible leads are designed for use In hospitals and medical installations where patients and staff are subjected to dangerous, uncontrollable compensating currents flowing between equipment and touchable conducting parts of different voltage potentials, the answer to this problem is the installation of a seamless equipotent...