What are the shipping charges for products like Heat-Shrink & Cold-Shrink Sleeves?

Yes. We keep updating our stock frequently and if a product like Heat-Shrink & Cold-Shrink Sleeves is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Heat-Shrink & Cold-Shrink Sleeves is not in stock then we will let you know.

Where are your products like Heat-Shrink & Cold-Shrink Sleeves manufactured?

Yes. We keep updating our stock frequently and if a product like Heat-Shrink & Cold-Shrink Sleeves is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Heat-Shrink & Cold-Shrink Sleeves?

Yes. We keep updating our stock frequently and if a product like Heat-Shrink & Cold-Shrink Sleeves is not in stock then we will let you know.

How long will it take to receive the order that I placed for Heat-Shrink & Cold-Shrink Sleeves?

Yes. We keep updating our stock frequently and if a product like Heat-Shrink & Cold-Shrink Sleeves is not in stock then we will let you know.

Are your products Heat-Shrink & Cold-Shrink Sleeves in stock?

Yes. We keep updating our stock frequently and if a product like Heat-Shrink & Cold-Shrink Sleeves is not in stock then we will let you know.

Heat-Shrink And Cold-Shrink Sleeves | Packaging Sleeves | Heat Shrink

New items

RS_700-4567, RS PRO

RS Pro Flexible Polyolefin Heat Shrink Tubing, 3:1 Ratio From RS Pro a range of high quality, easy to use general purpose heat shrink tubing made from flexible, flame retardant Polyolefin. This heat shrinkable tubing has a low shrink temperature of just 70°C (minimum) and a high shrink ratio of 3:1 which means it shrinks to a third of its original diameter and is ideal for covering irregular or awkward shapes What is Heat Shrink Tubing? Heat shrink tubing is a type of extruded plastic tubing that can be cut to size and fitted over a wire or cable joint to protect and insulate the connection. When heated is applied the tubing shrinks permanently providing a protective seal. The amount it shrinks depends on its shrink ratio. When you buy the tubing it is in its expanded state, this expanded tubing has memory so when it is heated it returns to its original state. Larger shrink ratios are required to cover materials with a greater size variation. How to use Heat Shrink Tubing The diameter of the wire or cable is measured and the correct sized heat shrink tubing selected. A piece of the tube is cut to size which is long enough to cover the connection or joint after heating. This then slides onto the wire. After the cable or wire has been joined the piece of heat shrink shrinkable tube is moved over the joint and heated with a heat gun until it shrinks and forms a tight wrapping around the joint Features and Benefits of Flexible Polyolefin Heat Shrink Tubing Flexible Polyolefin is a material derived from polyethylene and is one of the most commonly used insulating materials being both highly flexible, fast shrinking and durable. When heated this polyolefin tube shrinks radially to a third its original diameter hence the ratio of 3:1 Flexible Polyolefin tubing has the following properties: Very flexible High 3:1 shrinkage ratio, shrinks to a third of its original diameter, ideal for larger, irregular shapes Flame retardant (apart from transparent version) Operat...

Product Detail

New items

450-20000, HellermannTyton

Cable Repair Sleeving This range of cable repair sleeve enables quick and safe repair of damaged cable sheaths. Due to the high shrinkage rate and the different diameters, a scope of 15 mm can be covered up to 160 mm. The repair sleeve is up in lengths of 250 mm 1000 mm available Fast, durable, and labour-saving repair of damaged cable sheaths Simple and easy to use High-quality polyamide adhesive inner Excellent shrinkage Thermo-chromatic points (TCP) shrink indication Good corrosion protection properties with excellent abrasion and weather resistance High UV resistance Halogen-free

Product Detail

New items

RS_399-669, RS PRO

RS Pro Flexible Polyolefin Heat Shrink Tubing with 2:1 Shrink Ratio From RS Pro a range of high quality, easy to use heat shrink tubing made from flexible, flame retardant Polyolefin. The shrink ratio of this heat shrink tubing is 2:1 which means it shrinks to half of its original diameter. This heat shrinkable tubing meets the requirements of a wide range of high tech and industrial standards including SAE-AMS-DTL-23053/5 class 1 What is Heat Shrink Tubing? Heat shrink tubing is a type of extruded plastic tubing that can be cut to size and fitted over a wire or cable joint to protect and insulate the connection. When heated is applied the tubing shrinks permanently providing a protective seal. The amount it shrinks depends on its shrink ratio. When you buy the tubing it is in its expanded state, this expanded tubing has memory so when it is heated it returns to its original state. Larger shrink ratios are required to cover materials with a greater size variation. Features and Benefits of Flexible Polyolefin Heat Shrink Tubing Flexible Polyolefin is a material derived from polyethylene and is one of the most commonly used insulating materials being both highly flexible, fast shrinking and durable. When heated this polyolefin tubing shrinks radially to half its original diameter hence the ratio of 2:1. Flexible Polyolefin tubing has the following properties: Very flexible 2:1 shrinkage ratio, shrinks to half its original diameter Flame retardant Operating temperature range of -55 to +135°C and up to 200°C for short time durations Shrink temperature of 90°C minimum Excellent electrical insulation properties Resistant to common fluids and solvents Meets requirements of SAE-AMS-DTL-23053/5 Class 1 What is Polyolefin Heat Shrink Tubing Used For? This polyolefin heat-shrinkable tubing is very versatile and is used in military and aerospace applications, automotive applications, industrial machinery, electronics and construction machinery. Heat shrink tu...

Product Detail

New items

317-00034, HellermannTyton

Product Detail

New items

192991-0015/TNA16CA02-18L, ITT Cannon

Rear Housing Available in heat-shrink or threaded versions for use with plastic flexible conduit. Can be fitted in place of the seal securing nut on respective plugs and sockets. Neptune Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.

Product Detail

New items

RS_399-940, RS PRO

RS Pro Clear Flexible Polyolefin Heat Shrink Tubing, 2:1 Ratio From RS Pro a range of high quality, easy to use heat shrink tubing made from flexible, transparent polyolefin. This clear heat shrink tubing allows marker tags and identification marks on cables and wires to be viewed through the tubing after it has been applied. The shrink ratio of this clear heat shrink tubing is 2:1 which means it shrinks to half of its original diameter and is SAE-AMS-DTL-23053 approved What is Heat Shrink Tubing? Heat shrink tubing is a type of extruded plastic tubing that can be cut to size and fitted over a wire or cable joint to protect and insulate the connection. When heated is applied the tubing shrinks permanently providing a protective seal. The amount it shrinks depends on its shrink ratio. When you buy the tubing it is in its expanded state, this expanded tubing has memory so when it is heated it returns to its original state. Larger shrink ratios are required to cover materials with a greater size variation. Features and Benefits of Flexible Polyolefin Heat Shrink Tubing Flexible Polyolefin is a material derived from polyethylene and is one of the most commonly used insulating materials being both highly flexible, fast shrinking and durable. When heated this polyolefin tubing shrinks radially to half its original diameter hence the ratio of 2:1. Flexible Polyolefin tubing has the following properties: Very flexible 2:1 shrinkage ratio, shrinks to half its original diameter Operating temperature range of -55 to +135°C Shrink temperature of 110°C minimum Excellent electrical insulation properties Resistant to common fluids and solvents Excellent abrasion resistance SAE-AMS-DTL-23053/5 Class 2 approved What is Polyolefin Heat Shrink Tubing Used For? This polyolefin heat-shrinkable tubing is very versatile and is used in military and aerospace applications, industrial machinery, electronics and construction machinery. Heat shrink tubing is used for protect...

Product Detail

New items

321-30600, HellermannTyton

Heatshrink Tubing HA67 6:1 Thick walled heatshrink tubing, halogen free The thermoplastic adhesive lined tubing Provides environmental sealing, excellent insulation and resistance to impact and abrasion HA67 high shrink ratio heavy duty heat shrinkable tubing designed to pass over large size connectors and shrink down onto much smaller cable jackets

Product Detail

New items

300-73551, HellermannTyton

HellermannTyton TCN20 Heat Shrink Tubing The TCN20 series of heat shrink tubing is flexible, flame retardant and manufactured from high-quality polyolefin. The tubing has a shrink ratio of 2:1 with an operating temperature range of -55 to +125°C. The TCN20 range of heat shrink is ideal for use in many applications such as cable bundling, electrical insulation, strain relief, identification and mechanical protection. Features and Benefits Shrink ratio of 2:1 Minimum shrink temperature 100°C Thin wall Self-extinguishing to UL 224 VW-1

Product Detail

New items

308-30151 HIS-3-BAG-1.5/0.5-PO-X-BK (10), HellermannTyton

Heat Shrink Tubing HIS-3-Bag The HIS-3 BAG series is a flexible thin wall heatshrink tubing made from polyolefin offering good cable protection and insulations and being an ideal solution for the electronics industry. It is a reliable electrical insulation and is ideal for cable joints and terminations. Features and Benefits Usable for insulation Offer great protection of cables and harnesses Cross-linked polyolefin Heat shrink ratio 3:1 Operating temperature of -55 to 135°C Flame retardant 10 pre-cut pieces per bag Why should I use HIS-3 BAG Series Heat-Shrink Tubing? The HIS-3 BAG series of heatshrink tubing offers convenience with pre-cut pieces in the bag and performance in having great protection for cables, good insulation and being flame retardant. What does a heat shrink ratio of 3:1 mean? A ratio of 3:1 means when the tube is heated it shrinks to a third of its original diameter. How can I shrink the tubing? A heat gun or a heat shrink oven are ideal ways to shrink your tubing. Before heating always check to ensure you know the correct heating temperature of your tubing. Remember to ensure all health and safety precautions have been taken prior to using a heating devise. Standards SAE-AMS-DTL-23053/5, UL224 125°C 600V VW-1 MIL-DTL-23053/5 Class 1 & 3

Product Detail

New items

553-40650 TULT6-2YE-PO-X-YE (110), HellermannTyton

HellermannTyton Heat Shrink and Cold Shrink Sleeve The HellermannTyton TULT6-2 heat shrink marker has white coloured sleeve that contains polyolefin cross-linked compound with good mechanical strength and resistance to organic solvents and chemicals. It is a commercial grade marker supplied as a continuous tube and has a 6mm sleeve, 2mm shrunk diameter and 11000mm length. The surface of the tubing is specially prepared for excellent print performance at all times. It has a range that allows the users to create a high quality print. It is possible to either perforate the tubing at predetermined lengths or fully sever the markers. Features and Benefits Delivery in convenient storage boxes Highly flexible Shrink ratio 3:1 Applications Automation technology Cable assembly Marking wires and cables Medical devices Switchgears construction Certifications CSA certified UL approved

Product Detail

New items

300-30640 HIS-PACK-6.4/3.2-PO-X-BK (5), HellermannTyton

Heat Shrink Tubing 2:1 on a Reel HIS-PACK range of general purpose heat shrink tubing with a shrink ratio of 2:1 and is supplied on a reel in a useful box for easy dispensing. The heat shrink can be used for various applications such as mechanical protection, insulation, identification and organisation. Features and Benefits Supplied in convenient dispenser box 2:1 shrink ratio Available in a range of sizes from 1.2 mm to 25.4 mm Supplied in black Flammability rating UL 224 VW-1 Minimum shrink temperature of +100 °C

Product Detail

New items

TREDUX MA47 - 40/12, HellermannTyton

Tredux Heat-Shrink Tubing, Medium-Walled Black heat-shrink tubing in 1 m lengths With internal adhesive Medium-walled Reliable electrical insulation Mechanical protection of overground and underground cables and lines Resistant to solvents, acids and alkaline solutions Thermoplastic internal adhesive offers good protection against moisture and weather conditions

Product Detail