Strain Gauge Accessories

Model UV-10 Bridge Based Sensor In-Line Amplifier The Model UV-1o amplifier has been designed to supply a highly regulated bridge excitation voltage for the transducer and converts the millivolt signal of the transducer to a ±10 V dc signal. For quick calibration the universal inline features two selectable excitation voltages, programmable gain settings, wide adjustment range on the zero, and a buffered solid-state shunt cal relay. Features: Strain gage sensor amplifier ±10 V dc three-wire output 3 V, 5 V, or 10 V excitation voltages at 70 mA 18 V dc to 32 V dc supply voltage NEMA 4 housing Increases signal-to-noise ratio in noisy environments Effects of voltage drops in excitation sources are eliminated Signals may be sent to the data systems from low impedance sources

Rotary encoder 5862 - absolute, multiturn, shaft, 58 mm Multiturn rotary encoder in shaft design With contact-free multiturn level and new intelligent sensing technology (I-S-T) Designed with Integrative Technology® 4 (programmable) outputs Resolution up to 8192 (13 Bit) per revolution, 4096 (12 Bit) revolutions, corresponds to 25 Bit The following parameters can be programmed: code type, resolution per revolution, overall resolution, rotational direction (clockwise or counter clockwise), zero point, limit switch Installation depth 66 mm Solid shaft Ø 6 mm or Ø 10 mm SSI interface Protection rating IP65 Shock-resistant up to 250 g Size Ø 58 mm Mechanical characteristics speed: Moment of inertia of rotor: approx. 1.8 x 10-6 kgm 2 Starting torque: Radial shaft load-carrying capacity: 80 N Axial shaft load-carrying capacity: 40 N Protection rating according to EN 60 529: IP65 Working temperature range: -20 °C → +70 °C Operating temp. range: -20 °C → +80 °C Shaft: Stainless steel Shock resistance: 2500 m/s 2 , 6 ms, (in accordance with DIN-IEC 68-2-27) Electrical characteristic values Interface type: Synchronous serial interface (SSI) Supply voltage (UB): 5 Vdc → 30 Vdc Output driver: RS485 Power consumption: Type 89 mA, max. 138 mA (without load) Permitted load/channel: max. ±20 mA Update rate max. 1600 / s SSI cycle rate min./max.: 100 kHz / 500 kHz Signal level: High: typ. 3.8 V, low: typ. 1.3 V (load = 20 mA) Rise time tr: max. 100 ns (without cable) Fall time tf: max. 100 ns (without cable) Short-circuit proof outputs: Yes Polarity protection on UB: Yes Hardware inputs: For preset value and rotational direction Standards CE in accordance with EN 50082-2, EN 50081-2 and EN 55011 class B Reacts against magnetic interference in accordance with EN 61000-4, severity level 5 Kubler Push pull interface with inverted signals Short circuit protection Age and temperature compensation

WZSG - Measuring transducer for DMS Measuring transducer for DMS and load cells Normal signal outputs Digital input and output RS232 and RS485 interfaces LED status display Approvals CE

Incremental miniature rotary encoder, type 2400 Incremental miniature rotary encoder, type 2400 Incremental rotary encoders are used for recording the lengths, angles and speeds of motors. General technical specifications: Temperature compensation Reverse polarity protected and short circuit proof Shock resistance up to 1000 m / s 2 , 6 ms Kubler Push pull interface with inverted signals Short circuit protection Age and temperature compensation

Incremental miniature rotary encoder, type 2400 Incremental miniature rotary encoder, type 2400 Incremental rotary encoders are used for recording the lengths, angles and speeds of motors. General technical specifications: Temperature compensation Reverse polarity protected and short circuit proof Shock resistance up to 1000 m / s 2 , 6 ms Kubler Push pull interface with inverted signals Short circuit protection Age and temperature compensation