What are the shipping charges for products like Current Transducers?

Yes. We keep updating our stock frequently and if a product like Current Transducers is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Current Transducers is not in stock then we will let you know.

Where are your products like Current Transducers manufactured?

Yes. We keep updating our stock frequently and if a product like Current Transducers is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Current Transducers?

Yes. We keep updating our stock frequently and if a product like Current Transducers is not in stock then we will let you know.

How long will it take to receive the order that I placed for Current Transducers?

Yes. We keep updating our stock frequently and if a product like Current Transducers is not in stock then we will let you know.

Are your products Current Transducers in stock?

Yes. We keep updating our stock frequently and if a product like Current Transducers is not in stock then we will let you know.

Current Transducers | Current Transducer | Current Sensor

New items

CSDA1BC, Honeywell

Digital output current sensors These sensors feature a logic level output that changes when the set point is exceeded. Detects DC and AC current, but the output is deactivated each time zero is reached when the sensor is used to measure alternating current. Output voltage: 0.4 V Response time: 100 μs Operating temperature: –25 °C → +85 °C Stock release control detected activation no. power supply (V) current current (A) current (A) 181-1299 6 → 16 20 mA 0.5 +0.5 / - 0.25 0.08 181-1390 6 → 16 20 mA 3.5 +4 / - 1.8 0.6

Product Detail

New items

TT30-P38F75H2DRZ00, Sifam Tinsley

Theta 30P Programmable Current Transducers Sifam Tinsley Theta 30P programmable transducer measures and converts active, reactive, apparent power, Phase angle and Power Factor of a single phase or 3 phase AC system with balanced or unbalanced load into a proportional load independent DC current or voltage output signal. Features and Benefits True RMS measurement On-site programmable inputs On-site configurable as: Active / Reactive / Apparent / Phase Angle / Power Factor On-site selectable output: DC Current or DC Voltage Output response time Accuracy Class 0.2 (IEC / EN 60688) for power Accuracy Class 0.5 (IEC / EN 60688) for Phase angle / power factor Seven segment LCD display RS485 (ModBus) communication Sifam Tinsley Current Transducers

Product Detail

New items

HAC 100-S, LEM USA Inc.

SENSOR CURRENT HALL 100A AC/DC

Product Detail

New items

CDS4015ABC-KA, Sensitec

CDS4000 MagnetoResistive Current Sensors The CDS4000 current sensor family from Sensitec are compact devices offering accurate current measurement. They are able to provide measurement for AC, DC and mixed currents featuring integrated galvanic isolation. Designed for industrial applications, the CDS4000 current sensors are based on magnetoresistive technology. This feature means that they are accurate, energy efficient, highly sensitive and posses a high resolution. They are also robust and reliable. Complimentary evaluation boards are also available here at RS. Product Applications The sensors are ideal for industrial applications for example, solar power converters, AC variable speed drives and switched mode power supplies. Magnetoresistive Sensors, Sensitec

Product Detail

New items

CDS4006ABC-KA, Sensitec

CDS4000 MagnetoResistive Current Sensors The CDS4000 current sensor family from Sensitec are compact devices offering accurate current measurement. They are able to provide measurement for AC, DC and mixed currents featuring integrated galvanic isolation. Designed for industrial applications, the CDS4000 current sensors are based on magnetoresistive technology. This feature means that they are accurate, energy efficient, highly sensitive and posses a high resolution. They are also robust and reliable. Complimentary evaluation boards are also available here at RS. Product Applications The sensors are ideal for industrial applications for example, solar power converters, AC variable speed drives and switched mode power supplies. Magnetoresistive Sensors, Sensitec

Product Detail

New items

CMS-100DR, ABB

ABB Circuit Monitoring System CMS Circuit Monitoring Systems (CMS) are multichannel measurement systems for branch monitoring of electrical installations. Each system consists of a Control Unit and sensors with different measurement ranges and mounting possibilities. The systems can be installed easily within power distribution units. Due to the unique compact size, the system is also ideal as a retrofit solution for existing installations. Great importance has been placed on user friendliness, high accuracy and a wide measurement range (up to 160 A). CMS-600 Supply- and Control Centre Supplied as a unit with flat cable & connector set Illuminated touch display Intuitive menu navigation Supply voltage 24 Vdc Measure AC and DC currents up to 64 individual lines via CMS-Bus (4-wire flatcable) Measured data can be remotely queried by a 2-wire RS-485 interface RTU Modbus, Data rate 2400-115200 Baud DIN Rail Mounting Mounting Sensor Type PRO M Compact & SMISSLINE S800 DIN-Rail Cable Tie 18mm (80A) CMS-100PS ( 833-2875 ) CMS-100S8 ( 833-2879 ) CMS-100DR ( 833-2872 ) CMS-100CA ( 833-2863 ) 25mm (160A) CMS-200S8 ( 833-2885 ) CMS-200DR ( 833-2881 ) CMS-200CA ( 833-2888 )

Product Detail

New items

HCX001A6V, SENSOR TECHNICS

Product Detail

New items

HAIS 100-TP, LEM

HAIS-TP Series Open loop current transducer with LEM ASIC For measuring DC, AC and pulse currents With galvanic separation between primary and secondary circuits Unipolar voltage supply Reference access Voltage output Fixed offset voltage with corresponding amplification With built-in primary power rails for soldering on circuit board Housing made from insulating, self-extinguishing material UL94-V0 Approvals CE

Product Detail

New items

CMS-100PS, ABB

ABB Circuit Monitoring System CMS Circuit Monitoring Systems (CMS) are multichannel measurement systems for branch monitoring of electrical installations. Each system consists of a Control Unit and sensors with different measurement ranges and mounting possibilities. The systems can be installed easily within power distribution units. Due to the unique compact size, the system is also ideal as a retrofit solution for existing installations. Great importance has been placed on user friendliness, high accuracy and a wide measurement range (up to 160 A). CMS-600 Supply- and Control Centre Supplied as a unit with flat cable & connector set Illuminated touch display Intuitive menu navigation Supply voltage 24 Vdc Measure AC and DC currents up to 64 individual lines via CMS-Bus (4-wire flatcable) Measured data can be remotely queried by a 2-wire RS-485 interface RTU Modbus, Data rate 2400-115200 Baud DIN Rail Mounting Mounting Sensor Type PRO M Compact & SMISSLINE S800 DIN-Rail Cable Tie 18mm (80A) CMS-100PS ( 833-2875 ) CMS-100S8 ( 833-2879 ) CMS-100DR ( 833-2872 ) CMS-100CA ( 833-2863 ) 25mm (160A) CMS-200S8 ( 833-2885 ) CMS-200DR ( 833-2881 ) CMS-200CA ( 833-2888 ) DIN Rail Mounting

Product Detail

New items

2814825, Phoenix Contact

Current Transducer, MCR-SL-S-1-5-I-DCI Converts ac currents of 1A and 5A to standard 0-20mA and 4-20mA analogue signals Operates with most standard current transformers Galvanic 3-way isolation 2 power supply options : 24 V ac/dc ( 470-5838 ) or 85 → 230 V ac/dc ( 470-5844 ) Phoenix Contact DIN Rail Mounting Housing material: Polyamide – all types Sorry Your request could not be completed at this time

Product Detail

New items

CMS-200CA, ABB

ABB Circuit Monitoring System CMS Circuit Monitoring Systems (CMS) are multichannel measurement systems for branch monitoring of electrical installations. Each system consists of a Control Unit and sensors with different measurement ranges and mounting possibilities. The systems can be installed easily within power distribution units. Due to the unique compact size, the system is also ideal as a retrofit solution for existing installations. Great importance has been placed on user friendliness, high accuracy and a wide measurement range (up to 160 A). CMS-600 Supply- and Control Centre Supplied as a unit with flat cable & connector set Illuminated touch display Intuitive menu navigation Supply voltage 24 Vdc Measure AC and DC currents up to 64 individual lines via CMS-Bus (4-wire flatcable) Measured data can be remotely queried by a 2-wire RS-485 interface RTU Modbus, Data rate 2400-115200 Baud DIN Rail Mounting Mounting Sensor Type PRO M Compact & SMISSLINE S800 DIN-Rail Cable Tie 18mm (80A) CMS-100PS ( 833-2875 ) CMS-100S8 ( 833-2879 ) CMS-100DR ( 833-2872 ) CMS-100CA ( 833-2863 ) 25mm (160A) CMS-200S8 ( 833-2885 ) CMS-200DR ( 833-2881 ) CMS-200CA ( 833-2888 ) DIN Rail Mounting

Product Detail

New items

CMS2050-SP7, Sensitec

CMS2000 MagnetoResistive Current Sensors The CMS2000 current sensor family from Sensitec are compact devices offering accurate current measurement. They are able to provide measurement for AC, DC and mixed currents featuring integrated galvanic isolation. Designed for industrial applications, the CMS2000 current sensors are based on magnetoresistive technology. This feature means that they are accurate, energy efficient, highly sensitive and possess a high resolution. They are also robust and reliable. Product Applications The sensors are ideal for industrial applications for example, solar power converters, AC variable speed drives and switched mode power supplies. Magnetoresistive Sensors, Sensitec

Product Detail