What are the shipping charges for products like PLC Expansion Modules?

Yes. We keep updating our stock frequently and if a product like PLC Expansion Modules is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like PLC Expansion Modules is not in stock then we will let you know.

Where are your products like PLC Expansion Modules manufactured?

Yes. We keep updating our stock frequently and if a product like PLC Expansion Modules is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like PLC Expansion Modules?

Yes. We keep updating our stock frequently and if a product like PLC Expansion Modules is not in stock then we will let you know.

How long will it take to receive the order that I placed for PLC Expansion Modules?

Yes. We keep updating our stock frequently and if a product like PLC Expansion Modules is not in stock then we will let you know.

Are your products PLC Expansion Modules in stock?

Yes. We keep updating our stock frequently and if a product like PLC Expansion Modules is not in stock then we will let you know.

PLC Expansion Modules | Programmable Logic Controller | Plc Modules

New items

WDRR1A00B0A, Honeywell

Limitless Series Monitors and Receivers Reliable, flexible and secure wireless transmission Up to 305 m [1000 ft] communication range Field pairing function allows for rapid configuration Radio: WPAN 802.15.4; 2.4 GHz

Product Detail

New items

6GK72432AX010XA0, Siemens

CP243 AS-i Master A CP243-2 AS-i master module is an interface module which enables a S7-200 CPU to be connected to a AS-i network. The module can communicate with up to 31 nodes and each may have a maximum of 4 inputs and 4 outputs, therefore the module has the ability to be connected to 124 inputs and outputs. This module is used where slave units in a AS-i network are required to be monitored or controlled and for diagnostics Note This module is not compatible with S7-221 CPUs. CP243 AS-i Master This module is used where slave units in a AS-i network are required to be monitored or controlled and for diagnostics. Warning This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the alternative highlighted by the manufacturer. Alternatively, refer to the cross reference list in the Technical Reference section which highlights the upgrade path for your current generation of products.

Product Detail

New items

6ES73401BH020AE0, Siemens

S7-300 Interface Modules A range of different Interface Modules for S7-300 devices offering many different types of connection adaptations. S7-300 Software, Accessory Modules and Accessories

Product Detail

New items

6ES73511AH020AE0, Siemens

SIMATIC S7-300 FM351/2 Positioning/Cam Module The FM 351 positioning module is used for controlled positioning with rapid traverse/creep speed drives in the S7-300 automation system. The module has 2 independent channels and, thus, controls one rotary axis or one linear axis at a time. The module supports one incremental encoder or one absolute encoder (SSI) for each channel. You can operate several FM 351 positioning modules simultaneously. It is also possible to combine with other FM / CP modules. A typical application would be combining with an FM 352 electronic cam controller ( 746-6696 ). Two axis with axis types including: linear axis & rotary axis Four digital outputs per axis & four digital inputs per axis Typical drives / motors: standard motor - relay controlled, standard motor on frequency inverter (e.g., micromaster) & asynchronous motor on power section with vector control Position measuring systems include: incremental encoder 5 V, symmetrical, Incremental encoder 24 V, asymmetrical & SSI absolute encoder Monitoring functions include: monitoring the operating range by means of software limit switches, standstill monitoring, encoder monitoring, monitoring for axis movement and target approach System environment comprises of: centralised application, SIMATIC S7-300 from CPU 314 (recommendation: depends on user memory requirement of the application) & distributed use with ET 200M System integration comprising of: module exchange possible without PG & Teleservice possible S7-300 Comms-Net-Motion-Position SIMATIC Net communication processor and modules for connecting the SIMATIC S7-300 and ET200M to AS-Interface Configurable with STEP 7 ACCOR. AS-Interface SPEC. V3.0

Product Detail

New items

6GK5116-0BA00-2AA3, Siemens

S7-1200 X-100 Ethernet Switch Modules The devices of the SCALANCE X100 product line allow the cost-effective installation of Industrial Ethernet bus and star structures with switching functionality. Switches with redundant power supply and signaling contact for use in applications in the immediate vicinity of machinery. A variety of device variants with different numbers and designs of electrical and optical ports. Approvals CE, UL & C-Tick Siemens S7-1200

Product Detail

New items

CJ1WSCU21V1, Omron

CJ1W Series I/O Module CJ1W I/O modules are connected directly into the CJ/NJ CPU unit which give the option of connecting to further expansion racks via an I/O connecting cable. Rack-mountable units provide the user with the option to expand controller capacity even if space is limited Quick expansion without the hassle of intricate installation thanks to easy-to-use connectors Omron CJ1W Series Sorry Your request could not be completed at this time

Product Detail

New items

6ES73317PF110AB0, Siemens

Analogue Input Expansion Module Expansion modules with analog input for the connection of voltage and current sensors, thermocouples, resistors and resistance thermometers. Optically isolated V/I/Resistance/PT100,NI100,NI1000,LG-NI1000 Siemens S7-300 Digital and Analogue I/O Modules Expansion modules and accessories to support the Siemens S7-300 PLC range. Each S7-313 PLC CPU Base Unit may be expanded with up to 8 expansion modules. S7-314 CPU Base Units can accept a total of 4 expansion racks consisting of 8 expansion modules each.,All expansion modules share the following features: Compact design LEDs input signal status indication Front panel connector for actuators or sensors. Connectors can be coded according to application, thus preventing the connection of an incorrect unit No slot rules: the address of the input corresponds to the slot number Modules may be configured and the parameters set using STEP 7 Lite software Data is stored centrally. When a module is removed/replaced data is automatically sent to the new module, removing possible set up errors

Product Detail

New items

6ES73384BC010AB0, Siemens

S7-300 Signal Modules Siemens S7-300 Digital and Analogue I/O Modules Expansion modules and accessories to support the Siemens S7-300 PLC range. Each S7-313 PLC CPU Base Unit may be expanded with up to 8 expansion modules. S7-314 CPU Base Units can accept a total of 4 expansion racks consisting of 8 expansion modules each.,All expansion modules share the following features: Compact design LEDs input signal status indication Front panel connector for actuators or sensors. Connectors can be coded according to application, thus preventing the connection of an incorrect unit No slot rules: the address of the input corresponds to the slot number Modules may be configured and the parameters set using STEP 7 Lite software Data is stored centrally. When a module is removed/replaced data is automatically sent to the new module, removing possible set up errors

Product Detail

New items

TWDNOZ485D, Schneider Electric

Product Detail

New items

6ES7338-7XF00-0AB0, Siemens

S7-300 Signal Modules Siemens S7-300 Digital and Analogue I/O Modules Expansion modules and accessories to support the Siemens S7-300 PLC range. Each S7-313 PLC CPU Base Unit may be expanded with up to 8 expansion modules. S7-314 CPU Base Units can accept a total of 4 expansion racks consisting of 8 expansion modules each.,All expansion modules share the following features: Compact design LEDs input signal status indication Front panel connector for actuators or sensors. Connectors can be coded according to application, thus preventing the connection of an incorrect unit No slot rules: the address of the input corresponds to the slot number Modules may be configured and the parameters set using STEP 7 Lite software Data is stored centrally. When a module is removed/replaced data is automatically sent to the new module, removing possible set up errors

Product Detail

New items

EU4A-MEM-CARD1, Eaton

Easy Control - Software & Accessories Open standard programming to the IEC1131-3 standard, the Easy-Soft system uses editing tools based upon the widely used CoDeSys programming package from 3S. Proven technical features, simple handling and wide use of the software throughout Europe, guarantees success.,The editing tools allow the programmer to utilise the language with which they are most familiar, or that suits a particular part of the application. Ladder diagram for interlocking and structured text for mathematical formulae.,A number of features enable the application to be created quickly and are designed with one objective in mind: cost savings by reducing project design times. A selection of other features: global search and replace, the generation and use of libraries, context sensitive help, the output of a cross reference list, testing of un-used variables.Simulation facilities also allow the programmer to test the application without being connected to the PLC. X-soft comes with an integrated offline simulation tool designed specifically for the purpose. Graphic simulations may be created to test complete or part applications during the development process. Available programming languages Instruction List (IL) Structured Text (ST) Function Block Diagram (FBD) Continuous Function Chart (CFC) Ladder diagram (LD) Sequential Function Chart (SFC) Eaton Easy 200, 400, 500, 700 and 800 Two or four inputs on dc and 24Vac powered versions can be configured as 10 bit, 0-10V analogue Two 1kHz counter inputs on dc powered versions of the 500 and 700, (four 3/5kHz inputs on the 800) Available as lower cost versions without display or panel keys (part numbers ending in X), for applications where no user interaction is required, and where the unit will be programmed using software which is available separately Units with displays and panel keys can b...

Product Detail

New items

TSXDPZ10D2A, Schneider Electric

Preventa safety module type TSX DPZ The safety module is used to safely stop one or more emergency stop or safety stop control circuits according to standards EN 60204-1 and EN 954-1. Screw terminal and connections to a half-slot. Rated voltage: 24Vdc Number of inputs: 4 emergency stops or limit switches 1 enable button Safety outputs 2 N/O

Product Detail