How to install an electric water heater in a mobile home?

A mobile home is different as compared to a simple home because it is a large caravan, and it can stay in the same place, but you can pull it and take it to another place by using a car or van. People can live in a mobile home. It is also known as a manufactured home, and that is built in the factories.

What are electric water heaters?

As we can see nowadays, mostly every house has electric heaters. Likewise, the water in the tank can be heated just because of an electric heater, and you can get hot water in cold areas. Therefore, electric heaters are more necessary in cold countries. However, it can be installed either in the home or mobile home both.

Electric heaters are necessary for mobile home

An electric water heater provides hot water to the tank, and you can also install these heaters easily in your mobile homes. So, you should choose the model of the heater according to your home demand; that demand is based on two things one, where you want to fix this heater and second, which level of heating you need. Moreover, these heaters use power to heat the water and provide a constant water supply. Electric heaters are safe and require low maintenance.

In addition, it is compulsory that the heaters can be installed by a trained, certified electrician or plumber. You cannot install it at home because the installation method requires more instructions and care also. So, a large amount of electricity is required for this method. That’s why an expert plumber or electrician that have a license can easily do this installation.

Precaution must be taken before installing electric heaters

First, you have to check that the water heater fulfils all standards of the municipality. Then A rated water heater is good. So, you need an electrician and check the place for ventilation.

Steps to install an electric water heater in a mobile home

Installation of an electric water heater in a mobile home can be possible by following these steps. An expert electrician or plumber already knows these steps. In addition, insurance for a water heater is needed.

How to remove an old electric water heater?

Firstly, turn off the electricity and water supply
Secondly, the current hot water should be drained from the tank.
Detach the discharged pipe from the temperature and pressure relief valve.
Water supply lines should be stopped.
Lastly, the old water heater removes.

It is for the safety mode that you have to disconnect all the water supply and switch off the electricity. Water should not be wasted. So, you have to disconnect the all-pipe lines; in this way, you can escape from water discharge. Also, detach the gas line from the gas valve. Therefore, the vent duck a draft hood from the tank must be disconnected. Now you can remove the strapping or bracket. And then you can remove the old electric heaters.

Choose the place to install the electric heater

It is necessary to have access to the water heater in your home; that is why you must select the place near your master bedroom or laundry, and you can keep this heater in the kitchen. So you can get easy access to your electric water heater. An electric water heater should be installed inside the mobile home, while a gas heater must be installed outside the home.

First, you have to choose the place where to install this electric heater in your mobile home. Then the screws are fixed to make more secure the access panel more, and it has an on-off switch which glows red when water is heated.

Require tools and materials for installation

There is a list of tools and materials you can say equipment also that you need in the installation of the electric water heater. You must buy these tools and materials to complete your installation procedure.

Tools

Wrenches
Pipe wrenches
Tongue pliers or groove pliers
Drill machine
Screws
Anchors
Drip pan and drain

Materials

New water heater
Brackets and strapping as required
Discharge tube
Thread seal tape
Gas leak testing solution

Procedure to install an electric water heater

These are some simple steps, and by following these steps, you can install an electric heater. The procedure of installing electric heaters step by step is explained in detail below.

Firstly, install a drip pan
Secondly, the Pressure relief valve and the temperature can be connected to the new heater.
Using a flexible hose connects the new water supply lines.
To keep the water heater from tipping, install seismic straps.
Remove the aerator, then open the hot water valve.
Slowly fill the tank
When the tank is filled with water, then let the water run for 3 minutes.
Only a licensed electrician completes the electrical work.
Set the temperature according to your demand
Take notice of leaks and high pressure and check pipes every hour

Drain the water from the tank

First, you have to drain all the water from the tank. For this purpose, you have to fix a mobile home to the drain valve on the water heater. Now drain the water from the tank by opening the drain valve. Therefore, it is important to prevent suction and allow air into the system to open the temperature and pressure relief valve. Now close the drain wall when the tank is empty.

How to remove the old water heater?

It is compulsory to disconnect all the mentioned connections, which are flexible lines, hot and cold-water lines, and vent ducts from the draft hood on the tank strapping or brackets. And then you can remove the tank from the water heater.

How important is it to install a drip pan?

If it is required, then you surely need to install a drip pan. Suppose the size of the drip pan is appropriate to the new heater, and if it is in good condition and can be reused, then you can fix it.

Install the TRP valve and place the new heater

Now you can install a temperature and pressure relief valve into the electric heater and install the vent connection and TPR discharge tubes; then, you are able to install and place a new heater safely. So, connects the water lines and test that there is no gas leakage; then, you are ready to refill your tank and get hot water.

Conclusion

Electric heaters are very important and beneficial in a mobile home. You can facilitate yourself by using these electric heaters, but it is compulsory that a well-certified electrician can do this installation. It is safe to install it with an expert plumber. Electric heaters need low maintenance, and once you fix them, they can stay long-lasting. So, these may be less expensive as compared to gas heaters. In addition, these heaters are eco-friendly. You can get more constant hot water with electric heaters. It means that you don’t have to wait for hot water if you want more hot water, although electric heaters consume more electricity, so it may be expensive in the form of electricity bills. Overall, these heaters perform very well, and they are long-lasting and reliable.